Panasonic WV-CLR920A User Manual download pdf (Page 25)

-25-

• RS485 SET UP

You can remote control this camera by using a speci-

fied extension unit such as personal computer with a

modem.

Move the cursor to RS485 in the SET UP menu and

press

I. The RS485 SET UP menu appears on the

monitor screen.

Unit Number Setting

This item lets you select the camera number for RS-485

communication.

1. Move the cursor to the UNIT NUMBER parameter.

2. Select the camera number to be used with RS-485

communication.

The initial factory setting is 1.

* RS485 SET UP *

UNIT NUMBER 1

BAUD RATE 19200

DATA BIT 8

PARITY CHECK NONE

STOP BIT 1

XON/XOFF NOT USE

WAIT TIME OFF

ALARM DATA AUTO2

DELAY TIME OFF

RET

Baud Rate Setting

This item is lets you select the transmission speed for

RS-485 communication. (BAUD is the unit of bit per

second.)

1. Move the cursor to the BAUD RATE parameter.

2. Select the 19 200, 9 600, 4 800 or 2 400 bps for the

baud rate.

The initial factory setting is 19 200 bps.

Data Bit Setting

This item lets you select the number of data bits for RS-

485 communication.

1. Move the cursor to the DATA BIT parameter.

2. Select 7 or 8 bit for the number of data bits.

The initial factory setting is 8 bit.

Parity Check Setting

This item lets you select the parity bit for RS-485 com-

munication.

1. Move the cursor to the PARITY CHECK parameter.

2. Select NONE, EVEN or ODD for parity check.

The initial factory setting is NONE.

Stop Bit Setting

This item lets you select the number of stop bits for RS-

485 communication.

1. Move the cursor to the STOP BIT parameter.

2. Select 1 or 2 for the number of stop bits.

The initial factory setting is 1 bit.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 49 50

Comments to this Manuals

No comments

Panasonic WV-CLR920A User Manual Page 25

Comments to this Manuals

Related products and manuals for Cameras Panasonic WV-CLR920A