Panasonic DMREZ48VEB Operations Instructions download pdf (Page 68)

RQT9126

VHS and System Settings

 

(¼ 62, Accessing the Setup Menu)

All factory default settings are indicated with “Underlined” text.

To Others Setup

Others

Remote Control (¼ 80)

[DVD 1] [DVD 2] [DVD 3]

Clock (¼ 12)

Owner ID (¼ 11)

In order to prevent another person from using this unit if it is

stolen, you can set a PIN number and input your personal

information.

Once the PIN number has been set, you cannot return to the

factory preset. Make sure not to forget this.

 PIN number

 Name

 House No.

 Postcode

Power Save

[On] [Off]

Refer to the following when “Power Save” is set to “On”.

 Power consumption is minimized when the unit is turned off

(¼ 94).

 Startup of the unit becomes slower compared to when “Power

Save” is “Off”.

 When the unit is off, satellite programmes cannot be watched

on the TV because the signal from the satellite receiver

connected to AV2 input terminal of this unit is not looped

through. To watch them, turn on the unit. (¼ 11)

System Update

In order to update this unit, the TV Guide download, and support

system changes made by broadcasts, this unit periodically

performs software updates.



Press [OK] to show the following settings.



Update data and TV Guide download information are sent by an

unscheduled digital broadcast. In order to receive these updates,

you must be able to receive digital broadcasts.



An update will take approximately 60 minutes. While the update is

in progress, “SW-DL” appears on the unit’s display.

You cannot operate the unit until the update is complete.

Removing the AC mains lead while the update is in progress may

damage the unit



An TV Guide download will take approximately 30 minutes.

While the TV Guide download is in progress, “GUIDE” appears on

the unit’s display. The TV Guide download can be interrupted by

switching on the unit.

 To avoid hearing the startup sound of System Update for the

unit, perform the following steps.

– Select the time for Software Update (¼ below, TV Guide/

Software search period).

– Set “TV Guide Download in Standby” and “Software Update

in Standby” (¼ below) to “Off”, and update manually

(¼ below, Software Update Search Now).

TV Guide Download in Standby

[On] When the unit is turned off, TV Guide data is

downloaded automatically.

[Off]

Software Update in Standby

[On] You can perform the unit updates automatically when

the unit is turned off.

[Off]

TV Guide/Software search period

Selects the time to automatically perform TV Guide download

and updates when the unit is turned off. This can only be set

when “TV Guide Download in Standby” and “Software Update in

Standby” is set to “On”.

 If there is a programmed recording set for the time you have

selected, the programmed recording will be given priority.

[Automatic] The unit will give priority to searching for update

data at midnight.

[02:00–06:00] [06:00–10:00] [10:00–14:00]

[14:00–18:00] [18:00–22:00] [22:00–02:00]

Software Update Search Now

Start the search for new software manually.

A new software version is announced by a message. Do not

switch your unit off during the update. This could result in the

loss of data. A message shows that the update has ﬁ nished. If a

new software version is not going to be broadcast until the next

few days, a corresponding message also appears.

 If applicable update data is found, press [, ] to select

“Yes” and press [OK].

Initialize

Press [OK] to show the following settings.

Shipping Condition

This returns Setup Menus to default settings, except for the

ratings level, ratings password, Owner ID and Clock setting.

[Yes] [No]

 The timer recording programmes are also cancelled.

Default Settings

This returns Setup Menus to default settings, except for the

programmed channels, time settings, disc language settings,

ratings level, ratings password, Owner ID and remote control code.

[Yes] [No]

VHS

Tape Length

Set the length of the tape you are using so the unit can show the

correct remaining time.

[Auto (E-240)] The VHS automatically distinguishes E30, -60,

-90, -120, -180, and -240 tapes.

[E-195] For E195 tape

[E-260] For E260 tape

[E-300] For E300 tape

SQPB

To play back video cassettes recorded in S-VHS format (SQPB;

S-VHS Quasi Playback)

[Automatic] This unit automatically detects the format in

which the recording was made and selects the

same format for playback. However, picture

distortion may appear.

Therefore, set to [On] or [Off].

[On] Use this setting when playing back a cassette

tape recorded in the S-VHS format.

[Off] Use this setting when playing back a cassette

tape recorded in the VHS format only.

,  select “VHS” ¼  ¼ ,  select item

Setup

Picture

Sound

Display

Connection

VHS

Tuning

Others

RETURN

SELECT

TAB

Disc

Tape Length

Auto (E-240)

Automatic

SQPB

,  select “Others” ¼  ¼ ,  select item

Setup

Picture

Sound

Display

Connection

VHS

Tuning

Others

RETURN

SELECT

TAB

Disc

Clock

Remote Control

DVD 1

Owner ID

Power Save

System Update

Initialize

DMR-EZ48V_EB.indb 68DMR-EZ48V_EB.indb 68 2008/04/04 16:39:422008/04/04 16:39:42

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 95 96

Comments to this Manuals

No comments

Panasonic DMREZ48VEB Operations Instructions Page 68

Comments to this Manuals

Related products and manuals for Cassette players Panasonic DMREZ48VEB