Panasonic KX-T206E User Manual download pdf (Page 13)

Extension Connection

Wire Specification The wire specifications are as follows:

Wire Solid wire

Diameter of conductor ø 0.4 – ø 0.65 mm

Diameter with coating ø 0.66 – ø 1.05 mm

Connection Use a 4-pin plug (included) to connect extension lines.

There are 6 plugs to connect extensions to EXTN. 1 through EXTN. 6

jacks.

1. Lift the transparent part.

2. Insert the required telephone wires into the holes of the plug.

Then press the transparent part back into the black part.

Note: Do not strip the wires.

Insert the wires all the way into the plug.

For a proprietary telephone

For single line telephones

GROUND

SYSTEM

EXTN.

CO 2

CO 1

EXTN.

DPH

EXTN.

DOOR

OPENER

To extensions

Notes

• A facsimile must be connected to EXTN.6 jack if an optional DISA/FAX Detect card (KX-

T20691) is installed. See page 16 to install the card. System programming is also required.

The “#12 Fax Connection” program should be assigned as “ENABLE”. See page 25. The

“#24 Call Incoming Mode Selection” program should be assigned as “DISA”. See page 28.

• The EXTN.1 through EXTN.6 jacks correspond to extension numbers 21 through 26 respec-

tively.

• You can use cable holders to fix the wires.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

No comments

Panasonic KX-T206E User Manual Page 13