Panasonic KX-T206E User Manual download pdf (Page 20)

General Programming Instructions

Default Setting This system has a default factory setting. If any of the program-

ming needs to be changed, you can change the setting by system

programming.

Required Telephone Set You can use any of the following telephones for system program-

ming:

• Proprietary Telephone (PT): KX-T7130, KX-T7020, KX-T7050

• Single Line Telephone (SLT): tone type

All telephones (except KX-T7130) do not have display panels, so

you cannot check the setting you have made. Therefore, please use

KX-T7130 to check the programming.

Extensions Used for System programming can only be performed from extension 21.

Programming

To Check the Use KX-T7130. When you check the assignment, set the

Programmed Data MEMORY switch on PT to “PROGRAM”.

Enter “#” and the program address.

You cannot check programs #60, #62, #63, #65, #67, #84 and #85,

as they are not displayed on the display panel.

Before Programming To enter the system programming mode:

After Programming To exit the system programming mode:

[Off-hook]

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 39 40

No comments

Panasonic KX-T206E User Manual Page 20