Panasonic TH-65PF10RK User Manual download pdf (Page 47)

Options

Enable

Off-timer function

Normal

Initial Power Mode

ID select

Off

Remote ID

Off

Serial ID

Off

Display size

Off

Studio W/B

Off

Studio Gain

2/3

Options Adjustments

Item Effect Adjustments

Off-timer

function

Enable

Disable

Enable: Enables the “Off-timer function”.

Disable: Disables the “Off-timer function”.

Note: When “Disable” is set, the Off-timer is cancelled.

Initial Power

Mode

Normal Standby On

Sets the power mode of the unit for when the power recovers from failure or after plugging off

and in again.

Normal: Power returns in as the same state as before the power interruption.

Standby

: Power returns in standby mode. (Power Indicator : red/orange)

On: Power returns in power On. (Power Indicator : green)

Note: When using multiple displays, “Standby” is preferred to be set in order to reduce a power

load.

ID select

Sets panel ID number when panel is used in “Remote ID” or “Serial ID”.

Set value range: 0 - 100

(Standard value: 0)

Remote ID

Off On

Off: Disables ID remote control functions. You can use normal remote control operations.

On: Enable ID remote control functions.

Serial ID

Off On

Sets the panel ID Control.

Off: Disables external control by the ID.

On: Enables the external control by the ID.

Display size

Off On

Adjusts the image display size on screen.

Off: Sets the normal image display size on screen.

On: Sets the image display size approximately 95 % of the normal image display.

Off On

Notes:

• This setting is valid only when the input signals are as follows;

NTSC, PAL, SECAM, M.NTSC, PAL60, PAL-M, PAL-N (BNC Dual Video Terminal Board (TY-FB9BD))

525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p,

1125/30p, 1125/60p·50p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)

• This setting is invalid when two screen display, digital zoom, Multi display or Portrait display is

selected.

• When “Display size” is set to “On”, “H-Pos” and “V-Pos” in “Pos. /Size” can be adjusted.

• Refer to each board’s operating instruction for DVI, SDI, HDMI’s corresponding signals.

Studio W/B

Off On

Off: Nullify all the settings adjusted.

On: Sets the colour temperature for TV studio.

Note: Valid only when the low is set as colour temperature on screen adjustment.

Studio Gain

Off On

Sharpens the contrast for a better view when a part of the image is too light to see.

Off: Disables “Studio Gain”.

On: Enables “Studio Gain”.

Note: This setting is valid only when the input signals are as follows:

Component Video, RGB (analog), SDI, HDMI

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 55 56

Comments to this Manuals

No comments

Panasonic TH-65PF10RK User Manual Page 47

Comments to this Manuals

Related products and manuals for Computer hardware Panasonic TH-65PF10RK