Panasonic TH-65PF10RK User Manual Page 46
- Page / 56
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
Options
On
Weekly Command Timer
Onscreen display
Off
Initial INPUT
1/3
Maximum VOL level
Initial VOL level
Button lock
INPUT lock
Advanced PIP
Remocon User level
Off
Off
0
0
Off
Off
Off
Off
46
Options Adjustments
Item Effect Adjustments
Initial VOL
level
Off On
Press button to adjust the volume when the unit is turned on.
Off On
Off: Sets normal volume.
On: Sets your preferred volume.
Notes:
•
When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.
• You can hear the changed volume regardless of your volume setting before opening the options
menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.
Maximum VOL
level
Off On
Press button to adjust the maximum volume.
Off On
Off: Sets auto maximum volume.
On: Sets your preferred maximum volume.
Notes:
• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level”
automatically becomes the same as the “Maximum VOL level”.
• The volume display can go up to 63 regardless of the settings.
• You can hear the changed volume regardless of your volume setting before opening the options
menu if you adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
INPUT lock
Off PC INPUT1 INPUT2 INPUT3
Locks the input switch operation.
Notes:
• Only the adjusted signal is displayed (see page 15).
• Signal can be displayed when the Terminal board is installed.
• Input switch can be used when this is set to “Off”.
• In two screen display mode, if anything other than “Off” is set, the value will be fi xed as the value
input in the single screen display mode.
• When a dual input terminal board is attached, A or B is displayed depending on the selected input
signal. (Ex. INPUT1A, INPUT1B)
Button lock
Off MENU&ENTER On
Off: All the buttons at the bottom of the main unit can be used.
MENU&ENTER:
Locks
MENU
and
ENTER/
buttons on bottom face of main unit.
On: Locks all the button on bottom face of main unit.
Sets Button lock with the unit buttons in the following procedure.
Off: Press
four times→Press
INPUT
four times→Press four times→Press
ENTER/
MENU&ENTER: Press
ENTER/
four times→Press four times→Press
INPUT
four times→Press
ENTER/
On: Press four times→Press
ENTER/
four times→Press four times→Press
ENTER/
Remocon
User level
Off User1 User2 User3
Off: You can use all of the buttons on the remote control.
User1:
You can only use , , , , , , , buttons on the remote control.
User2:
You can only use
, buttons on the remote control.
User3:
Locks all the buttons on remote control.
Advanced PIP
Off On
Off: Sets normal two screen display mode (see page 23).
On: Sets Advanced PIP mode (see page 24).
Notes:
• When “INPUT lock” is “On”, you cannot use all the two screen display functions.
•
, buttons are unavailable during Advanced PIP mode operation.
- Operating Instructions 1
- TH-50PF10EK 1
- TH-65PF10EK 1
- Dear Panasonic Customer 2
- Table of Contents 2
- Important Safety Notice 3
- Safety Precautions 4
- Cleaning and maintenance 6
- Accessories 7
- Connections 10
- SERIAL Terminals connection 11
- OSD Language 13
- SetSelect 13
- TH-50PF10EK TH-65PF10EK 13
- Power On / Off 14
- Selecting the input signal 15
- Main Unit 16
- Remote Control Transmitter 17
- On-Screen Menu Displays 19
- Panasonic Auto 20
- Helpful Hint ( / 21
- Normalisation) 21
- MULTI PIP MULTI PIP MULTI PIP 23
- SWAP SWAP SWAP 23
- Weekly Command Timer 24
- Advanced PIP 24
- Picture Adjustments 26
- SDI Sound Output 28
- SURROUND 28
- Digital Zoom 29
- 2/2 Setup 30
- PRESENT TIME Setup 30
- Set up TIMER 31
- Reversal / Scroll selection 32
- Mode selection 32
- Start setting 32
- Screensaver 33
- Side Panel Adjustment 34
- (Example) 36
- Setup for MULTI DISPLAY 37
- MULTI DISPLAY Setup 38
- 2/2 Set up 39
- Portrait Setup 39
- – For NTSC AV images 41
- P-NR / Block NR / Mosquito NR 42
- Setup for Input Signals 43
- Options Adjustments 45
- Off-timer function 47
- Command No 50
- Command 50
- SHIPPING 51
- Troubleshooting 52
- B/B (BNC), PR/R (BNC) 55
- Specifi cations 55
- Printed in Czech Republic 56
Related products and manuals for Computer hardware Panasonic TH-65PF10RK
(6 pages)
© 2020, manymanuals.com. All rights reserved. | 0.242 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals