Panasonic VN1500EX Operations Instructions download pdf (Page 12)

Mounting on a DIN rail

tach the power supply unit to the DIN rail so that

the bottom hook is positioned at the bottom of the

power supply unit.

1 Hang the top hooks of the power supply unit

on the top of the DIN rail.

R At this point the power supply unit will be

hanging from the DIN rail but will not be

secure.

2 Pull the lever down, make sure the bottom of

the power supply unit is flat against the DIN

rail, and then release to lever.

R The bottom hook will slide up, securing the

bottom of the power supply unit to the DIN

rail.

A Top hooks

B Lever

C Bottom hook

Attaching directly to a wall

tach the power supply unit to the wall securely

using the 2 mounting screws.

Installing the door station

Required items

– M

ounting base (included)

– Screws (included)

– 2-pin terminal block (included)

– LAN cable (user supplied)

See “Wire and cable specifications”, Page 17

for specifications.

– Wires that connect the door station to relay box

and electric lock (user supplied)

See “Wire and cable specifications”, Page 17

for specifications.

– Water-resistant sealant (user supplied)

Optional items

– Relay box (VL-RLY1; sold separately)

Installation location

R Do

not install the product in the following

locations. There may be a risk of malfunction or

communication disturbances.

– Places where vibration, impact, or echoing

occurs.

– Places near a high concentration of dust,

hydrogen sulphide, ammonia, sulphur, or

noxious fumes.

– Places where there is excessive smoke, dust,

and high temperature.

– Places exposed to direct sunlight.

– Places where most of the background is the

sky.

– Places where the background is a white wall,

and direct sunlight will reflect off it.

R Install the product away from electronic

appliances such as TVs, radios, personal

computers, air conditioners, boiler control

panels with intercom, home security equipment,

wireless devices, or digital cordless phones.

R Install the door station at least 5 m away from

the room monitor.

R Dust protection/water protection is IP54. Only

when installation work specified in this

document is properly performed and appropriate

water protection treatment is performed.

R Make sure the rear of the product is not subject

to water.

R Depending on the installation location,

condensation may form on the product’s lens

cover. This may cause images to become

obscured. Condensation will dissipate as the

temperature rises.

Installation

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Comments to this Manuals

No comments

Panasonic VN1500EX Operations Instructions Page 12

Comments to this Manuals

Related products and manuals for Cool boxes Panasonic VN1500EX