Panasonic EY4541 Operations Instructions download pdf (Page 14)

- 14 -

Battery Pack Life

The rechargeable batteries have a

limited life. If the operation time be-

comes extremely short after recharg-

ing, replace the battery pack with a

new one.

Battery Recycling

ATTENTION:

For environmental protection and

recycling of materials, be sure that

it is disposed of at an officially as-

signed location, if there is one in

your country.

[Battery Charger]

Charging

Cautions for the Li-ion Battery

Pack

• If the temperature of the battery pack

falls approximately below −10°C

(14°F), charging will automatically

stop to prevent degradation of the

battery.

Common Cautions for the

Li-ion/Ni-MH/Ni-Cd Battery Pack

• The ambient temperature range is

between 0°C (32°F) and 40°C (104°F).

If the battery pack is used when the

battery temperature is below 0°C (32°F),

the tool may fail to function properly.

• When charging a cool battery pack

(below 0°C (32°F)) in a warm place,

leave the battery pack at the place

and wait for more than one hour to

warm up the battery to the level of the

ambient temperature.

• Cool down the charger when charg-

ing more than two battery packs

consecutively.

• Do not insert your fingers into contact

hole, when holding charger or any

other occasions.

CAUTION:

To prevent the risk of fire or dam-

age to the battery charger.

• Do not use power source from an en-

gine generator.

• Do not cover vent holes on the

charger and the battery pack.

• Unplug the charger when not in use.

Li-ion Battery Pack

NOTE:

Your battery pack is not fully charged

at the time of purchase. Be sure to

charge the battery before use.

Battery charger (EY0L80)

1. Plug the charger into the AC outlet.

NOTE:

Sparks may be produced when the

plug is inserted into the AC power

supply, but this is not a problem in

terms of safety.

2. Insert the battery pack firmly into the

charger.

1. Line up the alignment marks and

place the battery onto the dock on

the charger.

2. Slide forward in the direction of the

arrow.

3. During charging, the charging lamp

will be lit.

When charging is completed, an in-

ternal electronic switch will auto-

matically be triggered to prevent

overcharging.

• Charging will not start if the battery

pack is warm (for example, immedi-

ately after heavy-duty operation).

The orange standby lamp will be

flashing until the battery cools down.

Charging will then begin automati-

cally.

A

lignment marks

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 175 176

Comments to this Manuals

No comments