Panasonic PT-D12000U Specifications Sheet Page 3

  • Download
  • Add to my manuals
  • Print
  • Page
    / 12
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 2
S PEC F ILE
PT-D12000
3-Chip DLP™ Projector
As of July 2008 < 3 >
RGB2 IN:
R, G, B:
Y, P
B, PR
VIDEO IN:
VIDEO OUT:
S-VIDEO IN:
LAN:
SERIAL IN*
5
:
SERIAL OUT*
5
:
REMOTE 1 IN:
REMOTE 1 OUT:
REMOTE 2 IN:
Optional board slot*
6
:
With ET-MD77SD1 installed: SERIAL IN:
SERIAL OUT:
With ET-MD77SD3 installed: SERIAL IN:
SERIAL OUT:
With ET-MD100SD4 installed: Link A/Link B IN:
With ET-MD77DV installed: DVI-D IN:
Power cord:
Cabinet material:
Dimensions (W x H x D):
Weight*
7
:
D-sub HD 15-pin x 1
0.7 Vp-p (1.0 Vp-p for sync on G), 75 ohms
HD, VD, SYNC: TTL, high impedance, positive/negative automatic
VD: 1.4–5.0 Vp-p, positive/negative automatic, 75 ohms
Y: 1.0 p-p, 75 ohms (incl. sync signal), PB/PR: 0.7 Vp-p, 75 ohms
NOTE: HD/SYNC, and VD terminals do not accept 3-value direct sync signals.
BNC x 1, 1.0 Vp-p, 75 ohms
BNC x 1, 1.0 Vp-p, active through
Mini DIN 4-pin x 1
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms (S1 signal compatible)
RJ-45 x 1, 10Base-T/100Base-TX, compatible with PJLink™ (class 1)
D-sub 9-pin (female) x 2, for external control (RS-232C/RS-422 compli-
ant)
D-sub 9-pin (male) x 1, for link control
M3 jack x 1 for wired remote control
M3 jack x 1 for link control
D-sub 9-pin x 1 for external control (parallel)
BNC x 1, SD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE 259M compliant: 480i, 576i
BNC x 1, active through
BNC x 1
SD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE 292M compliant: 720/50p, 720/60p, 1035/60i, 1080/50i,
1080/60i, 1080/25p, 1080/24p, 1080/24sF, 1080/30p
BNC x 1, active through
BNC x 1 for each
SD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE 259M compliant: 480i, 576i
Single-link HD-SDI signal (YCBCR 4:2:2 10-bit):
SMPTE 292M compiant: 720/50p, 720/60p, 1080/50i, 1080/60i,
1080/25p, 1080/24p, 1080/24sF, 1080/30p
Dual-link HD-SDI signal (RGB 4:4:4 12-bit/10-bit):
SMPTE 372M compiant: 1920 x 1080/50i, 1920 x 1080/60i, 1920 x
1080/25p, 1920 x 1080/24p, 1920 x 1080/24sF, 1920 x 1080/30p
Dual-link HD-SDI signal (X´Y´Z´ 4:4:4 12-bit):
2048 x 1080/24p, 2048 x 1080/24sF
DVI-D 24-pin x 1, DVI 1.0 compliant, compatible with HDCP, compati-
ble with single link only,
480p, 576p, 720/60p, 720/50p, 1080/60i, 1080/50i, 1080/24p,
1080/24sF, 1080/25p, 1080/30p, 1080/60p, 1080/50p
VGA (640 x 480) WUXGA*
4
(1,920 x 1,200), compatible with non-
interlaced signals only, dot clock: 25–162 MHz
3 m/9.8´
Moulded plastic
578 x 320 x 643 mm (22-3/4˝ x 12-19/32˝ x 25-5/16˝) (without lens)
Approx. 35 kg (77.2 lbs) (without lens)
Page view 2
1 2 3 4 5 6 7 8 ... 11 12

Comments to this Manuals

No comments