Panasonic PT-D6000ULS Operations Instructions download pdf (Page 17)

Getting Started

Setting up

ENGLISH - 17

J Removing the projection lens

from the projector

1. Switch off the POWER button on the projector.

2. Rotate the lens cover counterclockwise and remove.

3. While pressing the lens release button, rotate the

projection lens counterclockwise, and remove the

projection lens.

J Attaching the projection lens to

the projector

1. Switch off the POWER button on the projector.

When the lens cover is attached, rotate counterclockwise

and remove.

2. Align the guide of the projection lens with the guide

groove in the projector, and then insert the lens.

3. Rotate the projection lens clockwise until it clicks into

place.

4. Place the lens cover back to the projector, and rotate

clockwise to attach.

Removing and attaching the projection lens

NOTE:

• Do not touch the lens signal contact. Dust or dirt may cause

defective contact.

• Do not touch the surface of the projection lens with your bare

hands.

• Store the replaced lens where it will be free from vibration and

impact.

Lens cover

Projection lens

Lens release button

NOTE:

• Make sure the projection lens is attached securely by rotating

the projection lens counterclockwise.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 49 50

No comments

Panasonic PT-D6000ULS Operations Instructions Page 17