Panasonic PT-L785U User Manual download pdf (Page 58)

58-ENGLISH

Lamp unit replacement procedure

LAMP indicatorOn-screen display

Illuminates red during

image projection and

standby mode.

Displayed for 30

seconds. Pressing any

button will clear the

display.

More than 1 350 hours

Remains displayed until

any button is pressed.

More than 1 500 hours

NOTE:

B If the lamp usage time has passed 1 500 hours (when “LAMP POWER”

has been set to “HIGH”), the projector will switch to standby mode after

approximately 10 minutes of operation. The steps ) to . on the next

page should thus be completed within 10 minutes.

# Turn off the MAIN POWER

switch according to the

procedure given in “Turning off

the power” on page 26, and

then disconnect the power

cord plug from the wall outlet

and check that the area around

the lamp unit has cooled down.

$ Use a Phillips screwdriver to

turn the air outlet port fixing

screws at the back of the

projector, and then open the air

outlet port.

% Use a Phillips screwdriver to

loosen the two lamp unit fixing

screws until the screws turn

freely. Then hold the handle of

the lamp unit and gently pull it

out from the projector.

& Insert the new lamp unit while

making sure that the direction

of insertion is correct, and then

use a Phillips screwdriver to

securely tighten the lamp unit

fixing screws.

Air outlet port

Handle

Air outlet port fixing screws

Lamp unit fixing screws

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 87 88

Comments to this Manuals

No comments

Panasonic PT-L785U User Manual Page 58

Comments to this Manuals

Related products and manuals for Data projectors Panasonic PT-L785U