64-ENGLISH
Replacing the projection lens
By replacing the projection lens with a lens that is sold separately, you can
change the projection distance.
#Turn the projection lens
anticlockwise until it stops.
$While pressing the lens
release button, turn the
projection lens anticlockwise
again.
%Remove the projection lens.
#Insert the other projection
lens (sold separately) as far
as it will go, while matching
the projection to the groove.
$Turn the projection lens
clockwise until a click is
heard.
Signal connection
Projection
Groove
Removing the lens
Installing the lens
NOTE:
B Be sure to turn off the power before replacing the projection lens.
B Do not touch the signal connection. If any dust or lint gets onto the
signal connection, the electrical contact may become poor.
B Do not touch the surface of the lens with your bare hands.
B Store the replaced projection lens away carefully to avoid subjecting it
to excessive vibration or shock.
B Be sure to adjust “LENS SELECT” in the “LENS” menu when replacing
the projection lens. (page 50)
Comments to this Manuals