Panasonic Arbitrator 360 User's Guide download pdf (Page 31)

(8) Menu (VPU settings) Copy

(1) Plug an USB memory* to the VPU which settings need to be copied to other VPUs.

(2) Select “CONFIG” tab of SI and enter the password to log in.

(3) Press “Operation” and “MENU COPY” button if you agree to copy menu settings to the USB memory.

*This action creates a setting configuration file in the USB memory. Please use the USB memory to get the setting configuration file

because even if inserting a P2 card, it cannot be created in the P2 card.

When some USB memory may not get the file, please use the different USB memory.

[Step 1] Get a setting configuration file from the VPU which settings need to be copied to other VPUs.

(1)

(2), (3)

Plug the USB memory stored a setting configuration file at [Step 1] to the 2

VPU.

Leaving the P2 card slot open, follow the procedure in the chart below.

[Step 2] Copy the settings to the 2

VPU.

REC LED

(RED)

READY LED

(Green)

BUSY LED

(RED)

Procedure

Duration

(Sec)

LED Display

REC READY BUSY

1) Keep pressing “REC” button for 10

sec till “Ready” or “Busy” lamp starts to flash

10 OFF (Flash) (Flash)

2) Loading a configuration file 20 to 50 ON Flash ON

3) Press “STOP” button when “Ready”

lamp lights ( “REC”/”Busy” lamp starts to flash.)

--- Flash ON Flash

4) Reboot and the copy completed. OFF OFF OFF

Either LED will flash

*Menu/VPU setting, Administrator/Officer information, Event Type (Bookmark) and Radar setting will be copied, but the following data will NOT be copied

Operating Time for AG-CPD15/Fan/CAM1/AG-RCP30, LCD Lighting Time, BIOS creation date, Last Errors, Version for AG-CPD15/AG-RCP30/Microcontroller

1 2 ... 26 27 28 29 30 31 32 33

Comments to this Manuals

No comments

Panasonic Arbitrator 360 User's Guide Page 31

Comments to this Manuals

Related products and manuals for Drive recorders Panasonic Arbitrator 360