Panasonic DMRE20 Operations Instructions Page 76
- Page / 95
- Table of contents
- TROUBLESHOOTING
- BOOKMARKS
Rated. / 5. Based on customer reviews
76
Changing the unit’s settings (continued)
Entering a password
You can limit play of DVDs unsuitable for some audiences,
children, for example. Play and changes to the settings are not
possible unless you enter a password.
When setting ratings
The password screen is shown when you select levels 0 to 7.
1) Input a 4-digit password with the numeric buttons.
≥If you enter a wrong number, press [CANCEL] to erase it
before you press [ENTER].
Do not forget your password.
2) Press [ENTER].
3) Press [ENTER].
The password is entered and the unit is locked.
Now, when you insert a DVD-Video that exceeds the ratings limit
you set, a message appears on the television.
Follow the on-screen instructions.
When changing ratings
The password screen is shown when you select “Ratings”.
1) Input a 4-digit password with the numeric buttons and press
[ENTER].
Unlock Recorder: To unlock the unit and return the rating
to 8
Change Password: To change your password
Change Level: To change the rating level
Temporary Unlock:To temporarily unlock the unit (the unit
locks again if you switch it to standby or
open the disc tray)
2) Select the item with the joystick [3, 4] and press [ENTER].
Actual screens depend on the operation. Follow the on-screen
instructions.
Digital output
Change these settings when you have connected equipment
through this unit’s OPTICAL DIGITAL AUDIO OUT terminal.
PCM Down Conversion
No (factory setting):
When you have used audio cables to connect the unit to other
equipment (analog connection [B] page 69).
Yes:
When you have used an optical digital cable to connect the unit to
other equipment (digital connection [A] page 69). Output is limited
to 48 kHz/16 bit.
Output of audio with a sampling frequency of 96 kHz
Audio is output as follows in accordance with the connections and
settings you make.
*
1
Audio is output at 96 kHz if the DVD is unprotected, but the
connected equipment must be able to handle such signals in
order to play them.
Dolby Digital
Bitstream (Factory preset):
When you have connected a unit with a built-in Dolby Digital
decoder.
PCM:
When you have connected a unit that doesn’t have a built-in Dolby
Digital decoder.*
2
DTS
Off (Factory preset):
When you have connected a unit that doesn’t have a built-in DTS
decoder.*
2
Bitstream:
When you have connected a unit with a built-in DTS decoder.
MPEG
Bitstream:
When you have connected a unit with a built-in MPEG decoder.
PCM (Factory preset):
When you have connected a unit that doesn’t have a built-in
MPEG decoder.*
2
*
2
Set “Dolby Digital” to “PCM”, “DTS” to “Off” and “MPEG” to
“PCM” if the other equipment doesn’t have decoders. Incorrect
settings can cause noise to be output which can be harmful to
your ears and speakers, and audio will not be recorded properly
to digital recording equipment.
Setting
Connection
[A] (digital) [B] (analog)
No No output*
1
Output as 96 kHz
Yes Converted and output
as 48 kHz/16 bit
Converted and output
as 48 kHz
E-Text2.fm 76 ページ ２００１年１０月２２日 月曜日 午前８時４８分
- DVD Video Recorder 1
- Grabadora de DVD vídeo 1
- Notes on these instructions 2
- Displays 2
- Contents 3
- LASER PRODUCT 4
- Television operation 5
- Discs you can use 6
- Play-only discs 6
- Discs that cannot be played 7
- Audio format logos 7
- Control reference guide 8
- The unit’s display 9
- Connecting and Setting up 10
- Auto Setup 13
- Selecting TV screen type 14
- TV ASPECT 15
- Playing discs (continued) 16
- Slow-motion play 17
- Frame-by-frame viewing 17
- Skipping 18
- Manual Skip 19
- Changing audio 20
- Remain 2 :34 FR 24
- 15:32.54 24/9 24
- Press [1, PLAY] 26
- ªTo stop play and recording 26
- TIME SLIP 27
- Using the top window 28
- ªTop window icons 29
- Timer recording 30
- Timer recording (continued) 31
- Manual programming 33
- To check programmes 35
- ªTo skip unwanted parts 37
- ªTo stop recording 37
- Entering titles 38
- DISC INFORMATION 39
- Disc Protection 40
- Releasing disc protection 41
- DISC INFORMATION (continued) 42
- Finalize—Creating DVD-Video 43
- Using the direct navigator 44
- About the programme list 45
- Erasing programmes 46
- Checking programme contents 48
- Protecting programmes 49
- Erasing parts of a programme 51
- Displaying play lists 53
- Creating play lists 54
- Playing play lists 55
- Playing play list scenes 56
- Adding scenes to a play list 56
- Moving a scene 57
- To re-edit a play list scene 58
- Copying play lists 59
- Erasing a play list 60
- Titling play lists 61
- Checking play list’s contents 61
- Common procedures 62
- Icons for disc information 63
- Icons for unit information 64
- (2) (3) (4) 65
- Marking Place 66
- Press [TOP WINDOW] 67
- ªTo stop recording manually 67
- ªWhen recording stops 67
- Child Lock 68
- Upgrading your system 68
- Connecting a Decoder 70
- S-VIDEO IN AUDIO INVIDEO IN 71
- Changing the unit’s settings 72
- Summary of settings 73
- Connection 75
- Entering a password 76
- Digital output 76
- Off Timer Setting 77
- Remote Setting 78
- Clock Settings 79
- Auto Clock Setting 80
- Channel Settings 81
- Power Save Setting 84
- Language Settings 85
- Country Settings 85
- Re-initialize Setting 85
- On-screen displays 86
- Glossary 87
- Maintenance and Handling 87
- Glossary (continued) 88
- Self-diagnosis 90
- Error displays 91
- Troubleshooting guide 92
- Remote control 93
- Recording and timer recording 94
- Specifications 95
Related products and manuals for DVD players Panasonic DMRE20
(49 pages)
(24 pages)
(26 pages)
(88 pages)
(24 pages)
(20 pages)
(56 pages)
(24 pages)
(68 pages)© 2020, manymanuals.com. All rights reserved. | 1.392 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals