Panasonic KXMB1500BL Operations Instructions

Operating InstructionsMulti-Function PrinterThe pictured model is KX-MB1500.Model No. KX-MB1500BLKX-MB1520BLKX-MB1530BLKX-MB1500GXKX-MB1500FRKX-MB1520

1.4 Overview1.4.1 Front viewNMAB C HJKL* The pictured model is KX-MB1520.DEF H IJ K LGABC* The pictured model is KX-MB1530.Speaker (KX-MB1520/KX-MB153

1.5 Toner cartridgeThe supplied toner cartridge is a starter toner cartridge.Caution:R Read the following instructions before you begininstallation. A

5 Hold the toner cartridge (A) by the centre handle,then insert firmly to lock into place.A6 Close the front cover.When to replace the toner cartridge

Power cordR Connect to a power outlet(220-240 V, 50 Hz).Telephone line cord*1R Connect to a single telephone line jack.[EXT] jack*1R You can connect a

1.7 Turning the power ONTurn the power switch to the ON position (A).A1.8 Recording paperNote for recording paper:R We recommend that you test paper (

– To use other paper sizes, change therecording paper size setting (feature #380 onpage 56).– To use thin paper, change the recording papertype settin

5 Insert the paper input tray into the unit.Note:R If the paper is not loaded correctly, re-adjust thepaper guides, or the paper may jam.R If the pape

1.8.2 Manual input trayYou can use the manual input tray for printing with thecomputer and for copying. It can hold one page at a time.When printing o

2.1 Dialling mode (KX-MB1520/KX-MB1530 only)Important:R This feature is not available for KX-MB1520BL/KX-MB1520NL/KX-MB1530BL/KX-MB1530NL.If you canno

2.3 Setting the original2.3.1 Using the scanner glassAB1 Open the document cover (A).2 Place the document FACE DOWN on the scannerglass (B), aligning

Thank you for purchasing a Panasonic product.You can select the desired language.The display and reports will be in the selected language.If you want

document feeder. To return the document to it’soriginal order you can feed it through the documentfeeder a second time, see page 70.R Confirm that the

2.4 Adjusting the volume(KX-MB1520/KX-MB1530 only)Important:R Before adjusting the volume, set the operationmode to fax mode. If the MFaxN light is OF

R You can turn this feature OFF (feature #226 onpage 56).2.6 Your logo (KX-MB1520/KX-MB1530 only)You can program your logo (name, company name, etc.)s

2.7 Your fax number (KX-MB1520/KX-MB1530 only)You can program your fax number so that it appears onthe top of each page sent.MSetNMRecallN MFNMENMMenu

2.8.2 Installing Multi-Function Station on acomputerR Install Multi-Function Station (CD-ROM) beforeconnecting the unit to a computer with the USBcabl

2. [Modify] A [Add Multi-Function Station Driver].Then follow the on-screen instructions.Note:R You cannot connect more than one unit to the samecompu

R To view operating instructions.[]R To display usage tips.[ ]R To display information about Multi-Function Station.Note:R You can confirm if the unit

3.1 Printing from WindowsapplicationsYou can print a file created in a Windows application. Forexample, to print from WordPad, proceed as follows:1 Op

– Labels that do not completely cover the backingsheet as follows:3.2 Easy Print UtilityBy printing using the Panasonic Easy Print Utility insteadof t

4.1 Scanning from the unit (PushScan)You can easily scan the document by using the operationpanel on the unit. You can select one of the followingscan

Available features for KX-MB1520/KX-MB1530 seriesThe following features may not be available for your unit. See the table below to determine whether y

Helpful hints:The OCR software is not supplied. Install the desiredthird-party OCR software, then specify the path of theOCR software. To specify the

If you use the automatic document feeder(KX-MB1530 only), only the first page will bepreviewed. When you need to refresh thescanned image, set the doc

5.1 Making a copy5.1.1 Using the scanner glassMSetNMCNMDNMENMStopNMStartNMCopy SizeNMQualityNMFax Auto AnswerNMCopyN* The pictured model is KX-MB1520.

5.1.2 Using the automatic document feeder(KX-MB1530 only)MCopyNMStopNMStartN1 If the MCopyN light is OFF, turn it ON by pressingMCopyN repeatedly.2 Se

Example: 150 % enlarged copyUsing the scanner glass (A):Original document Enlarged copyAUsing the automatic document feeder (KX-MB1530only):Original d

R The scanning area changes according to theselected setting in step 4. See the following tablefor details. The shaded area will be scanned.2 Press MP

Original document Page layout“8 in 1”5.2.4 Poster feature (Scanner glass only)You can make copies divided into 2 (“1 X 2”), 4 (“2 X2”) or 9 (“3 X 3”)

Original document Page layout“8 in 1” “PORTRAIT”“LANDSCAPE”Note:R You can save the previous page layout setting(feature #467 on page 64).Separate N in

– while the unit is printing received fax documents(KX-MB1520/KX-MB1530 only).1 Set the original (page 19).2 While “PC PRINTING” or “PRINTING”(KX-MB15

6.1 Sending a fax manually6.1.1 Using the scanner glassBy using the scanner glass, you can send a page frombooklets or small size paper.MSetNMCNMDNMSt

For your safetyLaser radiationCLASS 1 LASER PRODUCTR The printer of this unit utilises a laser. Use ofcontrols or adjustments or performance ofprocedu

Printing a sending reportA sending report provides you with a printed record oftransmission results. To print the sending reports, makesure that featu

6.3 Sending a fax usingphonebookBefore using this feature, store the desired names andtelephone numbers into the phonebook (page 40).R Make sure that

– [Do not enter a fax number directly]: You canonly select fax numbers stored in the phonebook.– [Re-enter to confirm the fax number]: Whenentering th

R The MFax Auto AnswerN light turns OFF.Note:R Make sure feature #404 is set to “TEL” beforehand(page 59).How to receive phone calls and faxesYou have

6.6 Receiving a fax automatically :Auto answer ONR A4 or letter size recording paper can be used.6.6.1 Activating FAX ONLY modePress MFax Auto AnswerN

2. When:– document reception is required,– a fax calling tone (slow beep) is heard, or– no sound is heard,press MGN MBN M9N (default fax activation co

disconnection code, feature #435 on page 62)to talk to the other party.* The pictured model is KX-MB1520.R The number of rings is determined by the “S

3 Record a greeting message on the answeringmachine.R We recommend you record a message up to 10seconds long, and not to pause for more than 4seconds

6.10 Junk fax prohibitor(preventing fax reception fromundesired callers)If you subscribe to Caller ID service (page 50), thisfeature prevents fax rece

6.11 Receiving a fax on yourcomputerYou can receive a fax document on your computer. Thereceived fax document is saved as an image file(TIFF-G4 format

R The unit should not be exposed to direct sunlight.R Do not place heavy objects on top of the unit. Whenyou leave the unit unused for a long period o

7.1 Caller ID serviceCaller ID feature is not available forKX-MB1520NL/KX-MB1530NL. See page 3 fordetails about the availability of related features.F

7.2 Viewing and calling backusing caller informationImportant:R If the area code of the received telephone numberis the same as yours, the area code m

8.1 ProgrammingMSetNMMenuN1 MMenuN2 Press MBN and the 3-digit code (page 53 topage 66).3 Press the appropriate selection to display the desiredsetting

8.2 Basic featuresFeature/Code SelectionSetting the date and timeMBNM1NM0NM1N(KX-MB1520/KX-MB1530only)Enter the date and time using the dial keypad. S

Feature/Code SelectionSetting the dialling modeMBNM1NM2NM0N(KX-MB1520/KX-MB1530only)Important:R This feature is not available for KX-MB1520BL/KX-MB152

Feature/Code SelectionSetting the tonermaintenance timeMBNM1NM5NM8N(KX-MB1520/KX-MB1530only)The unit will automatically activate for maintenance, once

Feature/Code SelectionChanging the ring count inFAX ONLY modeMBNM2NM1NM0N(KX-MB1520/KX-MB1530only)M1N “1”M2N “2” (default)M3N “3”M4N “4”M5N “5”M6N “6”

Feature/Code SelectionSetting the recording papertype for manual input trayMBNM3NM8NM4NM1N “PLAIN PAPER” (default): 75 g/m² to 90 g/m² paper.M2N “THIN

Feature/Code SelectionSetting the reorderingfeatureMBNM4NM9NM6N(KX-MB1530 only)M0N “OFF” (default): Deactivates this feature.M1N “ON”: After passing m

8.3 Fax features (KX-MB1520/KX-MB1530 only)Feature/Code SelectionChanging the TEL/FAXdelayed ring countMBNM2NM1NM2NIf you use an extension telephone i

1. Introduction and InstallationAccessories1.1 Supplied accessories ...81.2 Accessory information ...

Feature/Code SelectionSending documentsoverseasMBNM4NM1NM1NIf you cannot send a fax overseas even if the number is correct and the line isconnected, a

Feature/Code SelectionSetting the connecting toneMBNM4NM1NM6NIf you often have trouble when sending faxes, this feature allows you to hearconnecting t

Feature/Code SelectionChanging the fax activationcodeMBNM4NM3NM4NIf you wish to use an extension telephone to receive faxes, activate this featureand

Feature/Code SelectionReceiving a fax into thecomputerMBNM4NM4NM2NIf you wish to receive a fax into a computer, activate this feature and run [PCFAX]

8.4 Copy featuresFeature/Code SelectionSetting the input tray to usefor copyMBNM4NM6NM0NM1N “#1” (default): The paper input tray is selected. The disp

8.5 PC print featuresFeature/Code SelectionChanging the data timeoutsettingMBNM7NM7NM4NThe unit will automatically print the remaining data in memory

8.6 Scan featuresFeature/Code SelectionSetting the scan mode forPush ScanMBNM4NM9NM3NM1N “VIEWER” (default): The scanned image will be displayed in th

9.1 Character entry (KX-MB1520/KX-MB1530 only)The dial keypad is used to enter characters andnumbers.– Press MFN or MEN to move the cursor.– Press the

KX-MB1520SP/KX-MB1530SPKeypad CharactersM1N 1 . _ – [ ] { } +/ = , ` : ; ? |M2NABC2ÁÃ Çabc2áã çM3NDE F3Éde f3éM4NGHI4Íghi4íM5NJKL5jkl5M6NMN O6ÑÓÕmn o6

9.2.2 Using Device MonitorYou can confirm the setting information and currentstatus of the unit from your computer.1 Start Multi-Function Station.2 [U

11. Paper JamsJams11.1 Recording paper jam ...8111.2 Document jams (Automatic document feeder)(KX-MB1530 only) ...

9.4 Reordering the document(KX-MB1530 only)The order of multiple page documents will be reversedafter being fed into the automatic document feeder. Yo

10.1 Report messages (KX-MB1520/KX-MB1530 only)To indicate the unit’s fax transmission/reception status, one of the following messages will be printed

10.2 Display messagesTo indicate the unit’s status, one or more of the following messages will appear on the display.Display Cause & Solution“CALL

Display Cause & Solution“LOW TEMP.” R The inside of the unit is extremely cold and cannot be operated. Use the unitin a warmer area.“MEMORY FULL”

KX-MB1520G/KX-MB1530G only:Display Cause & Solution“MEM. NEAR FULL” R The memory is nearly full of received documents due to a lack of recordingpa

10.3 When a function does not work10.3.1 GeneralProblem Cause & SolutionThe unit does not work. R Check the connections (page 12, 24).The recordin

Problem Cause & SolutionI forgot the password forfeature programming viaremote operation.R You may have changed the feature programming password.

Problem Cause & SolutionWhen using the unit as aprinter, the printing result isdistorted.R When your unit is connected to the computer by USB, if

10.3.5 Fax (KX-MB1520/KX-MB1530 only)Problem Cause & SolutionI cannot send documents. R The telephone line cord is connected to the [EXT] jack on

Problem Cause & SolutionI cannot select the desiredreceiving mode.R If you want to set FAX ONLY mode:– press MFax Auto AnswerN repeatedly to turn

1.1 Supplied accessoriesA Toner cartridge(starter)*1B CD-ROMC Importantinformation guideD Quick installationguideE Power cord F Telephone linecord*2*3

Problem Cause & SolutionCallers complain that theycannot send a document.R There is no room left in the memory of your answering machine to record

11.1 Recording paper jam11.1.1 When the recording paper has jammedinside of the unitThe display will show the following:– “PAPER JAMMED” L“OPEN REAR

4. Push up the green levers (A) to the original position.A5. Close the rear cover.R Open and close the front cover to clear the errormessage.Case 2:Wh

3. Close the front cover.11.1.2 When the recording paper is not fedinto the unit properlyThe display will show the following:– “CHECK PAPER #1 PRESS S

11.2 Document jams (Automaticdocument feeder) (KX-MB1530only)The display will show the following:– “REMOVE DOCUMENT”Caution:R Do not pull out the jamm

2 Remove the jammed document (A) carefully.When the document has jammed near thedocument entrance:AWhen the document has jammed near thedocument exit:

12.1 Cleaning the white plates andglassClean the white plates and glass when a black line, awhite line or a dirty pattern appears on:– your recording

12.2 Cleaning the documentfeeder rollers (KX-MB1530 only)Clean the rollers when documents frequently misfeed, orwhen a line or a dirty pattern appears

13.1 Reference lists and reportsYou can print out the following lists and reports for yourreference.– “SETUP LIST”– “TEL NO. LIST”*1– “JOURNAL REPORT”

Standby: Approx. 4 W (KX-MB1500)Approx. 4.3 W (KX-MB1520)Approx. 5 W (KX-MB1530)Preheat: Approx. 55 WCopy: Approx. 350 WMaximum: Approx. 950 W (When t

1.3 Button descriptionsA B CD FEGHIJKMNOL* The pictured model is KX-MB1520/KX-MB1530.MQualityNR To select the contrast (page 32) and resolution(page 3

Toner cartridge lifeThe toner cartridge needs to be replaced regularly.Toner cartridge life depends on the amount of content ina printed document. Ton

14.1 Index##101 Date and time: 21#102 Your logo: 22#103 Your fax number: 23#110 Language: 53#114 Location: 53#120 Dialling mode: 18#121 Recall/F

Display contrast (Feature #145): 54Display messages: 72Document size: 19EEasy Print Utility: 28ECM selection (Feature #413): 60Edge hold (Feature

Silent fax (Feature #436): 62TEL/FAX (Feature #212): 59Ringer pattern (Feature #161): 55SScale selection (Feature #147): 54Scan features: 66Scan

94Notes

95Notes

PNQX3737YA DC0811KN1121-CD