Panasonic TXL32S20B User Manual Page 75

  • Download
  • Add to my manuals
  • Print
  • Page
    / 80
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 74
On screen messages
FAQs, etc.
75
Message Meaning / Action
Please check settings and connections
on HDMI devices.
Communication error in VIERA Link function (p. 61).
Please wait.
A function is in progress.
Recording this channel now
The recorder is recording the programme from its own tuner. You can turn
the TV off and leave the equipment recording in the normal way.
Reset to Factory Shipping Condition
Completed. Please switch off TV.
“Auto Setup” will automatically start when Mains power On / Off switch is
next turned On. (p. 12)
Sending Preset Data
Q-Link or VIERA Link channel download is in progress.
Software successfully updated.
Press EXIT to continue.
The software updating is finished.
Software update failed. Please try again later.
Press EXIT to continue.
Perform “System Update Search Now” in System Update (p. 51).
If this is still unsuccessful, there may not be any new software available.
This timer will not follow the TV Guide
information.
Press OK to continue, RETURN to restore
original timer.
If you edit the start time or end time of Guide link programming more than
10 minutes, it will no longer be performed as Guide link programming.
The programming will be performed according to the time setting.
Timer already expired !
The starting time in Timer Programming has already passed. Set the
timer correctly (p. 43).
Timer Event Due to Start

:

has been
programmed for External recording
at

:

This message will appear 2 mins. before timer programming event for
external recording due to start.
Timer incorrect !
Set the start and end times in Timer Programming correctly (p. 43).
Timer overlap.
Press OK to keep, RETURN to edit.
Timer programming events are overlapped. Press the OK button to keep
the overlapped setting. “Ext Rec.” is given priority over “Reminder”. When
two or more “Ext Rec.” overlap, the first timer programming event starts
and finishes as programmed. The next timer programming event can
then start.
Tuner Locked
Press EXIT to unlock.
Any timer programme in progress will
also be deleted.
If you want to unlock the tuner, cancel Direct TV Recording (p. 60 and
p. 62) or Ext Rec. of Timer Programming (p. 43).
Unable to download, please check equipment
The tape or disc is active. Stop the equipment and try again.
Media Player
Cannot read file
The file is damaged or unreadable.
The TV does not support the format.
(For the applicable formats and data p. 71)
No SD card inserted
Confirm the SD Card is inserted correctly.
No valid file to play
The card has no data.
Please confirm the SD card is OK
The inserted SD Card has a problem.
This operation is not possible
The selected operation is not available.
Network
Ethernet cable not connected
Check the connection of the LAN cable. If you use a hub, also check the
light on the hub is lit.
The LAN cable might be defective.
Page view 74
1 2 ... 70 71 72 73 74 75 76 77 78 79 80

Comments to this Manuals

No comments