Panasonic Toughpad FZ-A2 User Manual Page 13

  • Download
  • Add to my manuals
  • Print
  • Page
    / 172
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 12
13
For Used in Motor Vehicle
Warning: Check the following Commission Recommendation to determine proper installation and
usage of this product while operating within a motor vehicle.
“Commission Recommendation on safe and efcient in-vehicle information and communication
systems: A European statement of principles on human machine interface.”
Commission Recommendation is available from Ofcial Journal of the European Communities.
35-E-1
When using Port Replicator or Car Mounter on which an external antenna can be installed:
• External antenna for wireless LAN must be professionally installed.
• The gain of external antenna for wireless LAN must not exceed 5dBi.
• The user must maintain minimum of 20 cm spacing between the external antenna and all peo-
ple (excluding extremities of hands, wrist and feet) during wireless modes of operation.
41-E-1-1
When utilizing the wireless functionality, it requires a minimum 5 mm spacing from the body (ex-
cluding extremities such as hands, wrist and feet) around the whole sides except bottom of the
LCD display.
60-E-1
Interface Cable
Use of an interface cable longer than 3 m (9.84 feet) is not recommended.
11-E-1
For UK
For your safety, please read the following text carefully.
This appliance is supplied with a molded three pin mains plug for your safety and convenience.
A 3 ampere fuse is tted in this plug.
Should the fuse need to be replaced please ensure that the replacement fuse has a rating of 3
ampere and that it is approved by ASTA or BSI to BS1362.
Check for the ASTA mark
A S A
or the BSI mark on the body of the fuse.
If the plug contains a removable fuse cover you must ensure that it is retted when the fuse is replaced.
If you lose the fuse cover the plug must not be used until a replacement cover is obtained. A re-
placement fuse cover can be purchased from your local dealer.
If the tted molded plug is unsuitable for the socket outlet in your home then the fuse should be
removed and the plug cut off and disposed of safely.
There is a danger of severe electrical shock if the cut off plug is inserted into any 13-ampere socket.
How to replace the fuse
The location of the fuse differs according to the type of AC mains plug (gures A and B).
Conrm the AC mains plug tted and follow the instructions below. Illustrations may dif-
fer from actual AC mains plug.
Open the fuse cover with a screwdriver and replace the fuse and close or attach the
fuse cover.
Figure A Figure B
Fuse cover
8-E-1
FZ-A2mk1_ReadMe(CPE03209ZA)_11L.indb 13 2016/09/12 11:30:17
Page view 12
1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 171 172

Comments to this Manuals

No comments