Panasonic TCP42ST30 User Manual download pdf (Page 58)

4:3 side bars

Do not display a picture in 4:3 mode for an extended period, as this can cause

“Image retention” to remain on either or both sides of the display field.

To reduce the risk of such “Image retention”, change the brightness of the side

bars.

See page 49 for more information

●

The side bar may flash (alternate black/white) depending on the picture.

Side Bar

4:3

Screen

Display

Image retention

Input signal that can be displayed

* Mark: Applicable input signal for Component (Y, PB, PR), HDMI

horizontal frequency (kHz) vertical frequency (Hz) COMPONENT HDMI

525 (480)/60i 15.73 59.94

525 (480)/60p 31.47 59.94

750 (720)/60p 45.00 59.94

1,125 (1,080)/60i 33.75 59.94

1,125 (1,080)/60p 67.43 59.94

1,125 (1,080)/60p 67.50 60.00

1,125 (1,080)/24p 26.97 23.98

1,125 (1,080)/24p 27.00 24.00

Note

●

Signals other than those shown above may not be displayed properly.

●

The above signals are reformatted for optimal viewing on your display.

Panasonic does not guarantee operation and performance of peripheral devices made by other manufacturers; and we

disclaim any liability or damage arising from operation and/or performance from usage of such other maker’s peripheral

devices.

Care and Cleaning

First, unplug the Power cord plug from the wall outlet.

Display panel

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning cloth or a soft, lint-

free cloth.

●

If the surface is particularly dirty, soak a soft, lint-free cloth in diluted mild liquid dish soap (1 part mild liquid dish soap diluted

by 100 times the amount of water) and then wring the cloth to remove excess liquid. Use this cloth to wipe the surface of the

display panel, then wipe it evenly with a dry cloth of the same type until the surface is dry.

●

Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile

substances such as insect sprays, solvents, and thinner; otherwise, the quality of the surface may be adversely affected.

Cabinet

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

●

If the cabinet is particularly dirty, soak the cloth in a weak mild liquid dish soap and then wring the cloth dry.

Use this cloth to wipe the cabinet and then wipe it dry with a dry cloth.

●

Do not allow any mild liquid dish soap to come into direct contact with the surface of the Plasma TV.

If water droplets get inside the unit, operating problems may result.

●

Avoid contact with volatile substances such as insect sprays, solvents, and thinner; otherwise, the quality of the cabinet surface

may be adversely affected or the coating may peel off.

●

Do not let articles made from rubber or PVC be in contact with the TV for long periods of time.

Pedestal

●

Cleaning

Wipe the surfaces with a soft, dry cloth. If the unit is particularly dirty, clean it using a cloth soaked with water to which a small

amount of mild liquid dish soap has been added and then wipe with a dry cloth.

Do not use products such as solvents, thinner, or household wax for cleaning, as they can damage the surface coating. (If

using a chemically-treated cloth, follow the instructions supplied with the cloth.)

●

Do not attach sticky tape or labels, as they can make the surface of the pedestal dirty. Do not allow long-term contact with

rubber, vinyl products, or the like. (Doing so will cause deterioration.)

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 71 72

Comments to this Manuals

No comments

Panasonic TCP42ST30 User Manual Page 58

Comments to this Manuals

Related products and manuals for Plasma TVs Panasonic TCP42ST30