Panasonic PT-EW630U User Manual download pdf (Page 83)

Network

ENGLISH -

Settings

E-mail set up page

With this projector, if a problem occurs or if the lamp usage time reaches a set value, an e-mail message can be

sent to one or more preset e-mail addresses (maximum two addresses).

Click [Detailed set up], then [E-mail set up] to display the E-mail setup page.

Select Enable to use the e-mail function.

Enter the IP address or server name of the

e-mail server (SMTP). The DNS server must be

set if the server name is entered.

Enter the e-mail address of the projector.

(maximum 63 characters)

The user can enter the location of, for

example, the installed projector so that the

recipient may easily identify the originator of

the e-mail.

(maximum 63 characters)

The user can modify the minimum time

interval of temperature warning mail. The

default value is 60 minutes. In this case, the

user cannot send another mail for 60 minutes

after sending previous temperature warning

mail even the set warning temperature is

reached again.

Select the temperature of the intake sensor at

which to send a warning message.

Enter the E-mail Address1 of your desired recipient.

Select the conditions for sending e-mail.

MAIL CONTENTS: Select [NORMAL] or [SIMPLE].

ERROR: An error is detected by self-diagnosis.

LAMP RUNTIME: Remaining lamp service time has reached the value set in the eld.

INTAKE AIR TEMPERATURE: Intake air temperature has reached the value set in the eld.

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 117 118

No comments

Panasonic PT-EW630U User Manual Page 83