Panasonic WV-SF438 Installation Guide download pdf (Page 23)

Connection

Before starting the connection, turn off the power of this camera and the devices to be connected.

Check and prepare the required devices and cables for connection.

Note:

 • Since the connector storage section does not

have a sufficient space, use a LAN cable that do

not exceed the sizes described in the illustrations.

40 mm {1-9/16 inches}

Straight section

30 mm {1-3/16 inches}

9 mm

{11/32 inches}

13 mm {1/2 inches}

Example of LAN cable connector

Caution:

 • ONLYCONNECT12VDCCLASS2POWERSUPPLYorLIMITEDPOWERSOURCE.

Remove the sub cover.

Insert a thin tool* into the sub cover of the camera as illustrated, then lift up the sub cover to

remove it. Connect the cables to the camera with the sub cover attached to the camera as

shown in the illustrations.

* A slotted head screwdriver etc.

Sub cover

IMPORTANT:

 • Donotuseexcessiveforcewhenremovingthesubcover.Failuretoobservethismaydam-

age the sub cover.

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 43 44

No comments

Panasonic WV-SF438 Installation Guide Page 23