Panasonic WV-SF438 Installation Guide download pdf (Page 35)

Troubleshooting

Before asking for repairs, check the symptoms with the following table.

Contact your dealer if a problem cannot be solved even after checking and trying the solution in the

table or a problem is not described below.

Symptom Cause/solution

Reference

pages

Power is not turned on.

When using DC power supply

•Is12VDCpowersupplyconnectedtothe

power supply terminal?

→ Check whether the connection is appropri-

ately established.

•IstheACadaptorinusecompliantwiththe

Specifications?

→ Check the Specifications regarding AC

adaptor.

When using a PoE device for power supply

•ArethePoEdeviceandthenetworkconnector

on the rear of the camera connected using a

LAN cable (4-pair)?

→ Check whether the connection is appropri-

ately established.

•DependingonthePoEdevice,thepowersup-

ply will stop when the demanded power

exceeds its total power limit for all PoE ports.

→ Refer to the operating instructions of the

PoE device in use.

26, 27

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 43 44

No comments

Panasonic WV-SF438 Installation Guide Page 35