Panasonic SCPMX7EG Operations Instructions download pdf (Page 10)

VQT4X49

ENGLISH

iPod/iPhone/iPad does not charge.

• Examine the connection.

• Charging an iPod/iPhone/iPad whose battery is depleted:

- When using the “iPod_Port” connection, turn this system

on. Do not turn this system off until the iPod/iPhone/iPad

becomes operational.

- When using the “iPod_Dock” connection, “Checking

Connection” will be displayed until the iPod/iPhone

becomes operational, but this system will have begun

charging.

The USB device or the contents in it cannot be read.

• The format of the USB device or the contents in it is/

are not compatible with the system.

• USB devices with storage capacity of more than 32 GB

cannot work in some conditions.

Slow operation of the USB device.

• Large content size or large memory USB device takes

longer time to read.

The elapsed time shown is different from the actual

play time.

• Transfer the data to another USB device or backup the

data and reformat the USB device.

Pairing cannot be done.

• Check the Bluetooth

device condition.

The device cannot be connected.

• The pairing of the device was unsuccessful or the

registration has been replaced. Try pairing the device

again.

• This system might be connected to a different device.

Disconnect the other device and try pairing the device

again.

The device is connected but audio cannot be heard

through this system.

• For some built-in Bluetooth

devices, you have to set

the audio output to “SC-PMX7” manually. Read the

operating instructions for the device for details.

The sound is interrupted.

• The device is out of the 10 m communication range.

Bring the Bluetooth

device closer to this system.

• Remove any obstacle between this system and the

device.

• Other devices that use the 2.4 GHz frequency band

(wireless router, microwaves, cordless phones, etc.)

are interfering. Bring the Bluetooth

device closer to

this system and distance it from the other devices.

• Select “Mode 1” for stable communication. (> 6)

“--:--”

• You connected the AC mains lead for the first time or

there was a power failure recently. Set the clock.

“Adjust CLOCK”

• Clock is not set. Adjust the clock accordingly.

“Adjust TIMER”

• Play timer is not set. Adjust the play timer accordingly.

“Auto Off”

• The unit has been left unused for about 30 minutes and will

shut down in a minute. Press any button to cancel it.

“Checking Connection”

• The unit is checking the connected iPod/iPhone/iPad.

If this display keeps appearing, make sure that iPod/

iPhone/iPad is inserted correctly and try again.

“Error”

• An incorrect operation was done. Read the instructions

and try again.

“F61” or “F76”

• There is a power supply problem.

“iPod_Dock Over Current Error”

“iPod_Port Over Current Error”

• The iPod/iPhone/iPad or USB device is drawing too

much power. Remove the iPod/iPhone/iPad or USB

device. Switch the system off and on again.

“No Device”

• The iPod/iPhone/iPad or USB device is not connected.

Examine the connection.

“No Disc”

• You have not put in a disc or put in a disc that the

system cannot play.

“No Play”

• Examine the content. You can only play supported

format.

• If there are more than 255 albums or folders (audio

and non-audio), some of the MP3 files in these albums

cannot be read and played. Transfer these music

albums to another USB device. Alternatively, reformat

the USB device and save these music albums prior to

saving the other non-audio folders.

“Not MP3/Error”

• An unsupported MP3 format. The system will skip that

track and play the next one.

“Not Supported”

• You have inserted an iPod/iPhone/iPad that cannot be

played.

• Switch off the iPod/iPhone/iPad and the system before

you connect the iPod/iPhone/iPad. Connect the iPod/

iPhone/iPad and try again.

“PGM Full”

• The number of programmed tracks is more than 24.

“Reading”

• The unit is checking the disc and USB device

information. After this display has disappeared, start

operating.

“–VBR–”

• The system cannot show the remaining play time for

variable bit rate (VBR) tracks.

USB

Bluetooth

Main unit displays

“Made for iPod”, “Made for iPhone”, and “Made for iPad” mean

that an electronic accessory has been designed to connect

specifically to iPod, iPhone, or iPad, respectively, and has been

certified by the developer to meet Apple performance standards.

Apple is not responsible for the operation of this device or its

compliance with safety and regulatory standards.

Please note that the use of this accessory with iPod, iPhone, or

iPad may affect wireless performance.

iPad, iPhone, iPod, iPod classic, iPod nano, and iPod touch are

trademarks of Apple Inc., registered in the U.S. and other

countries.

MPEG Layer-3 audio coding technology licensed from

Fraunhofer IIS and Thomson.

The Bluetooth

word mark and logos are owned by the Bluetooth

SIG, Inc. and any use of such marks by Panasonic Corporation

is under license.

Other trademarks and trade names are those of their respective

owners.

SC-PMX7EG-VQT4X49.book 10 ページ２０１３年１月２５日　金曜日　午前１０時３１分

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 43 44

Comments to this Manuals

No comments

Panasonic SCPMX7EG Operations Instructions Page 10

Comments to this Manuals

Related products and manuals for Smartwatches Panasonic SCPMX7EG