Panasonic Attune Operations Instructions download pdf (Page 32)

Symptom

Reference

pages

Cause/solution

You hear your echo in head-

set earpiece when you speak

into microphone of headset.

Outside speaker and microphone may not be properly installed.

• Be sure speaker and microphone are isolated from each

other, and tightly mounted with enough foam packed around

each of them to absorb vibrations.

–

Outbound and/or inbound audio level may be set too high.

• Set outbound audio level just high enough to be heard by

customers. Lower inbound audio to comfortable level.

Note: Lower inbound audio setting may also prevent feedback

noise.

–

Echo canceller may be OFF or Effect level may be "LOW".

• Set echo canceller level properly.

Note: Default setting is "MAX"(LED:RED))

You hear annoying noise of

vehicles outside.

DNR may be OFF or Effect level may be "LOW".

• Set DNR level properly.

Note: Default setting is "MID"(LED:YELLOW))

The TALK indicator and PAGE

indicator are blinking after

startup, and communication

cannot be performed at all.

The Center Module may fail to start up.

• Turn off the power and on the power again.

The TALK indicator and PAGE

indicator are blinking after

startup, but communication

can be performed.

The Double-Drive-Thru function does not work properly. But, the

Single Lane operation works well.

• Check to see whether the power of the other Center Module is

set to ON.

• Check to see whether the Center Modules are correctly con-

nected.

• Check to see whether LANE A and LANE B are selected for

the lanes, respectively.

9, 24

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 67 68

Comments to this Manuals

No comments

Panasonic Attune Operations Instructions Page 32

Comments to this Manuals

Related products and manuals for Supplementary music equipment Panasonic Attune