Panasonic CF-H1 Operations Instructions download pdf (Page 13)

Getting Started

1 Set your computer to the Cradle.

l Set the computer to the cradle, and connect the external keyboard and mouse to the

cradle.

lConnect the AC adaptor to the Cradle and a power outlet.

The battery charging starts automatically.

CAUTION

l Do not remove the computer from the Cradle until the “Setting up the computer”

procedure is completed.

l Whenusingthecomputerforthersttime,donotconnectanyperipheraldeviceexcept

the battery pack, Cradle, keyboard, mouse and AC adaptor.

l Handling the AC adaptor



Problems such as sudden voltage drops may arise during periods of thunder and lightning.

Since this could adversely affect your computer, an uninterruptible power source (UPS) is

highly recommended unless running from the battery pack alone.

2 Turn on the computer.

A Press the power switch (A).

The power indicator lights.

CAUTION

l Do not press the power switch repeatedly.

l The computer will forcibly be turned off if you press and hold the power switch for 4

seconds or longer.

l Once you turn off the computer, wait for 10 seconds or more before you turn on the

computer again.

Do not perform the following operation until the hard disk drive indicator turns off.

 Connecting or disconnecting the AC adaptor

 Pressing the power switch

 Touching the screen, external keyboard or external mouse

l When the CPU temperature is high, the computer may not start up to prevent overheating

of the CPU. Wait until the computer cools down, and then turn the power on again. If the

computer does not power on even after cooling down, contact Panasonic Technical

Support.

l Any changes from the default setting of the Setup Utility must not be made until the

“Setting up the computer” procedure is completed.

3 Setup Windows.

A Follow the on-screen instructions.

l After turning on the computer, “Please wait while windows sets up your computer ...”

appears, and then a small circle circulates on the screen. This will take a few minutes.

l SetupofWindowswilltakeapproximately20minutes.Gotothenextstep,conrming

each message on the display.

l Touch screen operation cannot be used until the “Setup windows” procedure is

completed. Use the external keyboard and mouse.

CAUTION

l You cannot choose the following words for user name and password: CON, PRN, AUX,

CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.

l You can change the user name, password, image and security setting after setup of

Windows.

l Remember your password. If you forget the password, you cannot use the Windows.

n Setting up the computer

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

Comments to this Manuals

No comments

Panasonic CF-H1 Operations Instructions Page 13

Comments to this Manuals

Related products and manuals for Tablets Panasonic CF-H1