Panasonic KXHDV130 Operations Instructions download pdf (Page 54)

Connect the cables as shown in the following illustration.

*1 60 mm (2 3/8 in) or less

R U

se a straight CAT 5e (or higher) Ethernet cable (not included) that is 6.5 mm (1/4 in) in diameter or

less.

When connecting to a switching hub

R If PoE is available, an AC adaptor is not needed.

R If you are using a PoE hub, the number of devices that you can connect simultaneously is limited by

the amount of power supplied by the hub.

R This unit complies with the PoE Class 1 standard.

When connecting a PC

R The PC port does not support PoE for connected devices.

When connecting cables and the AC adaptor

R Pass the Ethernet cable and the AC adaptor cord under the stand.

Wall Mounting

ote

R Make sure that the wall and the fixing method are strong enough to support the weight of the unit.

1. Insert the tabs of the wall mounting adaptor into the designated openings in the base, and then slide

the wall mounting adaptor in the direction of the arrow until it clicks.

2. Fasten the wall mounting adaptor to the base with the small screw.

(

Recommended torque: 0.4 N·m [4.08 kgf·cm/3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm/5.31 lbf·in])

3. Connect the AC adaptor and handset cord.

Installation and Setup

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 75 76

No comments

Panasonic KXHDV130 Operations Instructions Page 54