Panasonic NV-FJ620 User Manual download pdf (Page 25)

INTRO-JET SCAN

To Find the Beginning of Each Recording

(VHS Index Search System)

This VCR automatically records special index signals on the

tape every time a recording is started. The Index search

function makes use of these index signals to let you find the

beginning of a desired programme quickly and easily.

Index signals are automatically recorded in the following

cases:

– When you start a recording by pressing the REC button I,

REC/OTR button ^, or DIRECT REC button Q.

– When a timer recording starts.

– When you press the REC button I on the remote control

during recording.

Conditions for correct operation of the Index search function:

– The VCR must be in the stop mode or in the playback

mode.

– Each programme recorded on the tape must be at least

5 minutes long.

Preparations

– Display the VCR picture on the TV.

– Insert a recorded video cassette.

Operation

1 Press the INDEX button L (that corresponds to the

direction from the current tape position in which the

desired programme is located on the tape) to start the

index search.

For example, if you want to

search for the 2nd recorded

programme in forward direction,

press the INDEX L button L

twice.

– The VCR fast-forwards or rewinds the tape and

searches for the specified index signal (the beginning

of the desired recorded programme).

When it has been found, playback starts automatically.

To Cancel the Index Search or to Stop Playback:

Press the Stop button F.

Notes:

– Searching in either direction is possible up to the 20th

index signal.

– If you press either of the INDEX button L too many times,

simply press the other INDEX button L (indicating the

opposite direction) to correct it. In this way, you can reduce

the displayed figure down to 1.

– The figure on the VCR display decreases by 1 every time

an index signal is located.

Searching while Checking the Video

Cassette Contents (Intro-Jet Scan)

This VCR automatically records special index signals on the

tape every time a recording starts. The Intro-Jet Scan

function makes use of these index signals to play back the

beginning of each programme recorded on the cassette one

after another at high speed. This lets you quickly and easily

check the contents of a cassette and find a desired

programme.

Index signals are automatically recorded in the following

cases:

– When you start a recording by pressing the REC button I,

REC/OTR button ^, or DIRECT REC button Q.

– When a timer recording starts.

– When you press the REC button I on the remote control

during recording.

Conditions for correct operation of the Intro-Jet Scan

function:

– VCR must be switched on, be in the playback mode or be

in the standby mode.

– Each programme recorded on the tape must be at least

15 minutes long.

Preparations

– Display the VCR picture on the TV.

– Insert a recorded video cassette.

Operations

1 Press the SEARCH button 6 to start the Intro-Jet Scan.

– After rewinding the tape to the beginning, the VCR

plays it back at high speed for approximately

10 seconds. It then fast-forwards the tape to the next

tape position marked by an index signal (beginning of

a programme), and every time an index signal is found,

the VCR switches over to high-speed playback (Cue)

for about 10 seconds.

2 When you have found the programme that you want to

view, press the Play button 7 to start normal playback.

To Cancel the Intro-Jet Scan or to Stop Playback:

Press the Stop button F.

On Screen Display

VCR display

1 2 ... 20 21 22 23 24 25 26 27 28

Comments to this Manuals

No comments

Panasonic NV-FJ620 User Manual Page 25

Comments to this Manuals

Related products and manuals for Video recorders Panasonic NV-FJ620