Panasonic NV-FJ620 User Manual download pdf (Page 7)

Example:

3 Press the MENU button U to finish the setting mode.

4 Retune your TV to the new RF channel for the VCR.

Note:

– Even if the RF output channel has been changed, it is not

necessary to perform Auto Tuning.

To Change the RF output Channel

In some rare cases after tuning the TV to your VCR,

interference may be visible on the picture. To get rid of this

interference, you can manually adjust the RF output channel

a few channels up and down from the current setting. The

procedure is described below.

Operations

1 Hold down MENU button U for 5 seconds or more.

– The VCR display changes as shown below and the

VCR picture on the TV displays this pattern.

2 Enter the desired channel number (AU28–69, NZ21–69)

by the Numeric buttons 2 or the Channel button N.

– Ensure that the VCR/TV switch E is set to [VCR].

– Set the RF output channel of the VCR to [ss] (RF OFF)

when the VCR is connected to the TV via the Audio/

Video cable.

Press the Channel button N to display [ss].

NV-FJ620A:

SELECT

END

: , OK

:MENU

CLOCK SET

TUNER PRESET

CH ADD&DELETE

G-CODE CH SET

SYSTEM

OPTION

CH 1

CLEAR [OFF]

AUTO TUNE

SEARCH [3]

FINE

END :MENU

SELECT:

TUNER PRESET

CH 1

END: MENU

100

AUTO TUNING

IN PROGRESS,

PLEASE WAIT.

SELECT

END

: , OK

:MENU

CLOCK SET

TUNER PRESET

CH ADD&DELETE

G-CODE CH SET

SYSTEM

OPTION

2 8

28:

UHF

28–69

0–12

VHF

NV-FJ620A 45–470MHz

21–691–11NV-FJ620EA 45–470MHz

CATV

Panasonic VCR

END: MENU

Example for NV-FJ620A

VCR display

Example for NV-FJ620EA

On Screen Display

Auto Tuning Using the On Screen Display

Introduction

The VCR is tuned automatically by Plug in Auto Tuning.

However, Auto Tuning using the On Screen Display should

be performed according to the following method if necessary.

Preparations

– Confirm that the TV is on and the VCR viewing channel is

selected.

– Turn on the VCR and select any programme position

except A1 or A2.

– Set the VCR/TV switch E to [VCR].

Operations

1 Press the MENU button U to

display the Main menu on the TV

screen.

2 Press the Cursor buttons (

3434

34) S

to select [TUNER PRESET] then

press OK button T.

3 Press the Cursor buttons (

3434

34) S

to select [AUTO TUNE] then press

the Cursor buttons (

2121

21) S to start

the Auto Tuning.

– When Auto Tuning is completed,

the On Screen Display

disappears and programme

position 1 is selected.

The number displayed here

is the number of channels

still to be auto tuned.

Channels that can be Received

Notes:

– Auto Tuning searches for TV stations from VHF minimum to

UHF maximum and memorizes every tuned programme

position. Other programme positions are skipped.

– Auto Tuning takes five or more minutes to complete its

search.

– If the VCR is not correctly tuned by Auto Tuning, follow the

procedure on the next page.

…

(RF OFF)

NV-FJ620EA:

(RF OFF)

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

Comments to this Manuals

No comments

Panasonic NV-FJ620 User Manual Page 7

Comments to this Manuals

Related products and manuals for Video recorders Panasonic NV-FJ620