Panasonic SDRS100 User Manual download pdf (Page 32)

VQT0T60

Recording

First, format the SD card if one which has been used on another device is going to be used

for the first time on this unit. (P66) When the SD card is formatted, all of the recorded data

(files) is deleted. Once the data is deleted, it cannot be restored. Copy valuable data onto a

PC or other device before proceeding with the formatting. When copying images recorded

using this unit to a PC, you must use MotionSD STUDIO. (P74)

This unit is compatible with wide-screen TVs (16:9) and set to wide mode at the time of

purchase. To watch images on normal TVs (4:3), change the wide mode setting before

recording (P41) or when playing back the images on the TV screen (P72).

∫ Basic camera holding

≥ Open the LCD monitor.

Recording cannot start when the LCD monitor

is closed. However, even if the LCD monitor is

closed during recording, the power does not

turn off until recording is ended.

≥ The angle of the LCD monitor can be adjusted

to suit what you want to record.

≥ We recommend attaching the hand strap 4

(supplied) to prevent the camera from dropping.

≥ Do not cover the White balance sensor 3 with

your fingers, etc.

≥ Do not cover the lens, the front of the flash 1 or the built-in stereo microphone 2

with your fingers.

Check before recording

Depending on the TV connected,

the sides of the images (the part

outside the dotted line) being

played may not appear. We

recommend widening the recording

range of the objects you want to

record beforehand.

1 16:9 screen

2 4:3 screen

The clock is not set at the time of purchase. If the screen shows the incorrect date/

time, then adjust it.

15:42

15.12.2005

15:42

15.12.2005

16:9 4:3

VQT0T60_EB.book 32 ページ２００５年８月２４日　水曜日　午後１時５７分

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 111 112

No comments

Panasonic SDRS100 User Manual Page 32