Panasonic SDRS100 User Manual download pdf (Page 68)

VQT0T60

∫ What is DPOF?

DPOF stands for Digital Print Order Format. This enables picture printing information to

be written onto an SD card so that it can be used on a system supporitng DPOF.

To print pictures by directly connecting this unit to the printer, use a printer compatible

with PictBridge. (Read the operating instructions for the printer.)

¬Connect this unit to the AC adaptor.

¬Rotate the mode dial to select .

1 Open the terminal cover, then firmly

plug one end of the USB cable 1

(supplied) into the unit’s USB terminal

and the other end into the terminal on

the printer.

Insert the plugs as far as they will go.

The images recorded on the SD card are

displayed as thumbnails.

≥ When no SD card is inserted in this unit, the

[ ] indication does not appear. (You

cannot print any pictures.)

≥ When this unit and the printer are not

connected properly, the [ ] indication

keeps blinking. (It will blink for over

approx. 1 minute.) Connect the cable or check

the printer.

≥ Do not use any other USB cables except the

supplied one. (Operation is not guaranteed

with any other USB cables.)

DPOF setting (continued)

≥ The DPOF setting can be established for up to 999 scenes.

≥

DPOF setting made on another camera may not be recognised by this unit. Please

perform the

DPOF settings on this unit.

≥ You cannot add the recording date to pictures to be printed with the DPOF settings.

≥ If the write protection switch on an SD card is set to [LOCK], the DPOF setting cannot

be set. (P16)

PictBridge

This is for printing pictures by directly connecting to the printer.

SETUP ENTER

1/24

PictBridge

VQT0T60_EB.book 68 ページ２００５年８月２４日　水曜日　午後１時５７分

1 2 ... 63 64 65 66 67 68 69 70 71 72 73 ... 111 112

No comments

Panasonic SDRS100 User Manual Page 68