Panasonic WV-CP504E User Manual download pdf (Page 19)

Set the detection areas

Set the detection areas for motion detection and the detection of appearance/disappearance of stationary objects.

Up to 2 detection areas can be set.

Follow the procedure below.

Step 1

Move the cursor to "AREA" and select "SETUP", and then press the setting button.

→ The "AREA" screen appears.

Step 2

Move the cursor onto the number to select the area number using the right or left button.

Step 3

Move the cursor to "POSITION" and press the setting button.

Step 4

Use the up, down, right, and left buttons to determine the left upper position of the area to be set and press the setting button.

Note:

 • The area corresponding to the selected number will be displayed in a green frame, while the other set areas are shown in a

white frame.

Step 5

Use the up, down, right, and left buttons to determine the right lower position of the area to be set and press the setting button.

→ The asterisk mark "*" will be displayed after the number and the area setting will be saved.

Note:

 • Todeletethearea,selecttheareanumberandpressthesettingbuttonaftermovingthecursorto"DEL".

 • Tochangethesettingsofthearea,selecttheareanumberandrepeatfromstep3.

"OBJECT DET" screen Area setting screen"MOTION DET" screen

**MOTION DET**(1)

MOTION OFF

LOITERING OFF

DIRECTION OFF

AREA SETUP

SENSITIVITY

RET TOP END

**AREA 1 /2**(1)

POSITION PUSH SW

UPPER LEFT

DEL

RET TOP END

**OBJECT DET**(1)

REMOVAL AND LEFT BEHIND

DURATION TIME 10s

AREA SETUP

SENSITIVITY

RET TOP END

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 34 35

No comments

Panasonic WV-CP504E User Manual Page 19