Panasonic WVCS650_SERIES Operations Instructions download pdf (Page 5)

- 2 -

1. Do not attempt to disassemble the

camera.

To prevent electric shock, do not remove

screws or covers.

There are no user serviceable parts inside.

Ask a qualified service person for servicing.

2. Handle the camera with care.

Do not abuse the camera. Avoid striking,

shaking, etc. The camera could be

damaged by improper handling or storage.

3. Do not expose the camera to rain or

moisture, or try to operate it in wet areas.

This product is designed for indoor use or

locations where it is protected from rain and

moisture.

Turn the power off immediately and ask a

qualified service person for servicing.

Moisture can damage the camera and also

create the danger of electric shock.

4. Do not use strong or abrasive detergents

when cleaning the camera body.

Use a dry cloth to clean the camera when

dirty.

In case the dirt is hard to remove, use a mild

detergent and wipe gently.

5. Never face the camera towards the sun.

Do not aim the camera at bright objects.

Whether the camera is in use or not, never

aim it at the sun or other extremely bright

objects. Otherwise, blooming or smear may

be caused.

6. Do not install this camera upside down

This camera is designed for mounting on the

ceiling or wall. Using this camera installed

upside down, for example,mounted on the

floor, may cause malfunction.

7. Do not block cooling holes on the diecast

case

This camera has a cooling fan inside.

Blocking the cooling holes leads to build up

of heat the camera and may cause

malfunction.

8. If “OVER HEAT” sign appears on the

monitor screen

The temperature inside the camera exceeds

the normal level because of a malfunction of

the cooling fan etc. Turn the power off

immediately and refer servicing to qualified

service personal.

9. Do not operate the camera beyond the

specified temperature, humidity or power

source ratings.

Use the camera under conditions where

temperature is between −10°C - +50°C (14°F

- 122°F), and humidity is below 90 %. The

input power source is 220 -240 V AC 50Hz

for WV-CS650, WV-CSR650, and 24 V AC

50Hz for WV-CS654.

PRECAUTIONS

To prevent fire or electric shock hazard, the

UL listed wire, VW-1, style 1015, AWG 18 or

UL listed power supply cord, type SJT should

be used for the cable for 24V AC input

terminals.

CAUTION

1 2 3 4 5 6 7 8 9 10 ... 41 42

Comments to this Manuals

No comments