Panasonic DMC-TZ1 User Manual download pdf (Page 107)

Others

107

VQT0V40

2: The LCD monitor becomes darker or

brighter for a moment.

• This phenomenon appears when you

press the shutter button halfway to set

the aperture value and does not affect

the recorded pictures.

3: The LCD monitor flickers indoors.

• The LCD monitor may flicker for a few

seconds after turning the camera on

indoors under fluorescent light.

This is not a malfunction.

4: The LCD monitor is too bright or dark.

• Adjust the brightness of the screen.

(P20)

• Is the power LCD function or high angle

mode activated?

5: Black, red, blue and green dots

appear on the LCD monitor.

• These pixels do not affect the recorded

pictures.

This is not a malfunction.

6: Noise appears on the LCD monitor.

• In dark places, noise may appear to

maintain the brightness of the LCD

monitor.

This does not affect the pictures you are

recording.

7: A vertical line appears on the LCD

monitor.

• This is a phenomenon called smear. It

is a characteristic of CCD and appears

when the subject has a bright part.

Uneven colors may also appear around

the smear. This is not a malfunction. It

is recorded in motion pictures but is not

recorded on still pictures.

8: Distortion in the LCD monitor.

• When holding the edge of the LCD

monitor, there may be some distortion,

however this is not a malfunction.

Moreover, this has no effect on the

taken pictures or playback.

∫ Flash

1: The flash is not activated.

• Is the flash setting set to Forced OFF

[]?

– Change the flash setting. (P40)

• The flash is not activated when motion

picture mode [ ], [SCENERY] (P52),

[NIGHT SCENERY] (P53),

[FIREWORKS] (P55), [STARRY SKY]

(P55) or [AERIAL PHOTO] (P56) in

scene mode is selected.

2: The flash is activated 2 times.

• When you select red-eye reduction

(P40), the flash is activated once before

the actual recording to reduce the

red-eye phenomenon (eyes of the

subject appearing red in the picture)

and then activated again for the actual

recording.

∫ Playback

1: The picture being played back is

rotated and displayed in an

unexpected direction.

The camera has a function that

automatically rotates the display of

pictures recorded holding the camera

vertically. (If you take pictures when

aiming the camera up or down, the

camera may recognize that it is being

held vertically.)

• You can display the pictures without

being rotated when [ROTATE DISP.]

(P83) is set to [OFF].

• You can rotate pictures with the

[ROTATE] function. (P83)

2: The picture is not played back.

• Is the mode dial set to playback [ ]?

• Is there a picture on the built-in memory

or the card?

The pictures on the built-in memory

appears when a card is not inserted.

The picture data on the card appears

when a card is inserted. (P16)

VQT0V40ENG.book 107 ページ２００６年２月２７日　月曜日　午後１時１９分

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 123 124

Comments to this Manuals

No comments