Panasonic DMC-TZ1 User Manual download pdf (Page 14)

Preparation

14

VQT0V40

Inserting/Removing

the Battery

• Check that the camera is turned off and

that the lens is retracted.

1 Slide the release lever in the

direction of arrow and open the

card/battery door.

• Always use genuine Panasonic

batteries (CGA-S007A).

2 Insert:

Insert the charged battery until it

clicks.

Remove:

Slide the lock A to remove the

battery.

3 1 Close the card/battery door.

2 Slide the release lever in the

direction of the arrow.

• Remove the battery after use. Store the

removed battery in the battery carrying

case (supplied).

• When a fully charged battery has been

inserted for more than 24 hours, the clock

setting is stored (in the camera) for at

least 3 months even if the battery is

removed. (If you insert a battery that is not

sufficiently charged, the length of time that

the clock setting is stored may become

less.) However, the clock setting is

canceled after this length of time. In this

case, set the clock again. (P18)

• Do not remove the card or the battery

while the card is being accessed. The

data may be damaged. (P16)

• Remove the batteries after the LCD

monitor and the status indicator

(green) turn off. Otherwise, the settings

on the camera may not be stored

properly.

• Do not remove the battery with the

camera turned on as the settings on

the camera may not be stored properly.

• The supplied battery is designed only

for the camera. Do not use it with any

other equipment.

OPEN LOCK

OPEN LOCK

VQT0V40ENG.book 14 ページ２００６年２月２７日　月曜日　午後１時１９分

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 123 124

Comments to this Manuals

No comments