19
(4) Remove the key.
Turn the key counterclockwise to
[ ], and remove it.
SDHC Memory Card Insertion and Removal
(continued)
Removing an SDHC Memory Card
(1) Open the SDHC Memory Card
slot cover (see previous page).
(2) Push the center of the card
until it clicks so that the
SDHC Memory Card pops out
then pull it out straight.
(3) Close the SDHC Memory Card
slot cover.
Return the SDHC Memory Card
slot cover to its original closed
position and press the section
marked
PUSH
.
Note:
If an SDHC Memory Card was
removed while it was being
accessed, the files may be
corrupted. The corrupted files are
automatically repaired.
(For details, refer to “Restoring
Files Automatically” in Section 2:
Operation.)
Note:
The [BUSY] lamp blinks for a few
seconds when the SDHC Memory
Card slot cover is opened. Make
sure that the blinking has stopped
before removing an SDHC Memory
Card.
(4) Remove the key.
Turn the key counterclockwise to
[ ], and remove it.
(3) Close the SDHC Memory Card
slot cover.
Return the SDHC Memory Card
slot cover to its original closed
position and press the section
marked
PUSH
.
When you close the SDHC Memory
Card slot cover after inserting an SDHC
Memory Card, the [READY] lamp
indicates the recorder status.
(Refer to “Indicator Lamps and
Recorder Status” in Section 2:
Operation.)
Comments to this Manuals