Panasonic PT-D6000ULS User Manual download pdf (Page 47)

Technical Information

ENGLISH - 47

Appendix

Using the REMOTE 2 IN terminal provided on the connection terminals of the main unit, it is possible to operate the

projector from a control panel etc. furnished in a distant location where infrared remote control signal cannot be

received.

J Pin assignments and control

REMOTE 2 IN terminal

Pin No. Signal name Open (H) Short (L)

GND GND

POWER OFF ON

RGB1 Other RGB1

RGB2 Other RGB2

VIDEO Other VIDEO

S-VIDEO Other S-VIDEO

DVI-D Other DVI-D

SHUTTER OFF ON

RST / SET

Controlled by remote

control

Controlled by external

contact

NOTE:

• The following buttons on the remote control and the operation area of the projector can no longer be operated when pins

1 and 9 are shortened: POWER button and SHUTTER button. Neither will it be possible to use the RS-232C commands

or network functions corresponding to these functions.

• If you short pin 1 and pin 9, and also short one of the pins from 3 to 7 and pin 1, then the following buttons on the projector

operating area and the remote control can no longer be operated: POWER, RGB1, RGB2, DVI-D, VIDEO, S-VIDEO, SDI

and SHUTTER buttons. Neither will it be possible to use the RS-232C commands or network functions corresponding to

these functions.

Standby ON

Remote

terminal

External

control

LAMP

Remote terminal/External control

Projector set up in a meeting room Control panel located in a different room

1 2 ... 42 43 44 45 46 47 48 49 50 51 52

No comments

Panasonic PT-D6000ULS User Manual Page 47