Panasonic CU2E18PBE Operations Instructions download pdf (Page 9)

NON SERVICEABLE CRITERIAS

TURN OFF POWER SUPPLY then please consult

authorised dealer under the following conditions:

• Abnormal noise during operation.

• Water/foreign particles have entered the remote

control.

• Water leaks from Indoor unit.

• Circuit breaker switches off frequently.

• Power cord becomes unnaturally warm.

• Switches or buttons are not functioning properly.

9

English

To set the timer

Daily timer setting

To turn ON or OFF the unit at a preset time.

TIMER/CLOCK

CANCELCLOCK

SELECT

MO

D

E

O

FF

/ON

S

E

T

U

P

D

O

W

N

3

4

1

2

1

Press TIMER

MODE

to enter timer mode

• Press once to change the display from

clock to timer or vice-versa.

• Press for 4 seconds to change the display

from daily timer to weekly timer or vice-

versa.

2

Select ON or OFF

timer

Example:

OFF at 22:00

OFF/ON

3

Set the time

UP

DOWN

4

Conﬁ rm

SET

• To cancel, press

CANCEL

.

• When ON timer is set, the unit may start early

before the actual set time in order to achieve

the desired temperature on time.

• Timer operation is based on the clock set in

the remote control and repeats daily once set.

• The timer closest to the current time will be

activated ﬁ rst.

• If timer is cancelled manually or due to power

failure, you can restore the previous setting

by pressing

SET

.

How to use / Information / To set the timer

To ensure optimal performance of the unit,

cleaning has to be carried out at regular

intervals. Please consult authorised dealer.

• Switch off the power supply before cleaning.

• Do not touch the aluminium ﬁ n, sharp parts

may cause injury.

• Do not use benzine, thinner or scouring

powder.

• Use only soap (

pH 7) or neutral household

detergent.

• Do not use water hotter than 40 °C / 104 °F.

For seasonal inspection after extended

non-use

• No obstruction at air inlet and air outlet

vents.

• These units are mounted inside the ceiling.

It uses external air intake vent and air

outlet vent to operate. Please consult your

nearest dealer for seasonal inspection.

• After 15 minutes of operation, it is normal to

have the following temperature difference

between air inlet and air outlet vents:

COOL: ≥ 8 °C / 14.4 °F

HEAT: ≥ 14 °C / 25.2 °F

For extended non-use

• Activate HEAT mode for 2~3 hours to

remove moisture left in the internal parts

thoroughly to prevent mould growth.

• Turn off the power supply.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 91 92

Comments to this Manuals

No comments