Panasonic DP-C106 User Manual

Digital Color Imaging SystemModel No.DP-C106DocumentationOptionsDA-TL28C/TL26C/RM64C/RM128C/DU26C/SM112C/S27C®

Table of Contents Operating InstructionsxOptions and Supplies...

Installing the Oversize Paper Tray/Transparency Tray (option) Setting Up the DP-C1061-79Installing the Oversize Paper Tray/Transparency Tray (option)T

Setting Up the DP-C106 Installing the Oversize Paper Tray/Transparency Tray (option)1-804. Place the Tray Label on the Front Panel of Tray , if neces

2-1Getting to Know the DP-C106Printer, Front View1. Paper Tray 1 – place paper supply here2. Duplex Unit/Kit – option that allows two-sided printing

Getting to Know the DP-C106 Printer, Rear View2-2Printer, Rear View11. Scanner Power Connector –provides power to the Scanner12. Scanner Interface C

Printer, Internal View Getting to Know the DP-C1062-3Printer, Internal View17. Toner Carousel Access – the four Toner Cartridges are installed one at

Getting to Know the DP-C106 Printer Control Panel2-4C/101001010010Printer Control Panel1. Control Panel Screen – use to view the system status, menu

Scanner and Automatic Document Feeder (ADF) Components Getting to Know the DP-C1062-5Scanner and Automatic Document Feeder (ADF) ComponentsThe ADF com

Getting to Know the DP-C106 Scanner and Automatic Document Feeder (ADF) Components2-67. Registration Guide– align the original with the Registration

Scanner Control Panel Getting to Know the DP-C1062-7Scanner Control Panel1. Control Panel Screen – use to view the system status, menu options,proble

Getting to Know the DP-C106 Scanner Control Panel2-815. Zoom ( ) ARROW buttons – use to select Reduce/Enlarge from 25-400%16. Reduce/Enlarge

Operating Instructions Table of ContentsxiOverview of IPX Printing to the DP-C106 ...6-3

Options and Supplies Getting to Know the DP-C1062-9Options and SuppliesThe DP-C106 is a digital Color Copier/Printer which can produce images withgrea

Getting to Know the DP-C106 Options and Supplies2-10SuppliesPart Name Part No.1 Black Toner Cartridge DQ-UR26K1 Cyan Toner Cartridge DQ-UR26C1 Magenta

3–1System Administrator FunctionsThis chapter provides an introduction to system administrator functionsas well as a guide to the documentation. It in

System Administrator Functions3–2Map to the Networking ChaptersThe following flowchart provides the general order of systemadministration tasks for th

System Administrator Functions3–3Guide to the Networking ChaptersAdministration features are provided in the user software package andare built into t

System Administrator Functions3–4For these operations: And these tasks: Refer to:Getting users started withprintingSetting up printing to the DP-C

4–1Connecting to the NetworkThis chapter discusses the basic stages of connecting the printer to thenetwork, provides an overview of network requireme

Connecting to the Network4–2• Preparing each client workstation that will be printing to the DP-C106. Install the appropriate printer drivers an

Connecting to the Network4–3Supported Network Protocols and Frame TypesThe DP-C106 supports TCP/IP, IPX/SPX, and AppleTalk protocols(rules that enable

Connecting to the Network4–4Quick Path to InstallationThe DP-C106 can use Ethernet cabling to multiple workstations. It alsosupports a parallel cable

Table of Contents Operating InstructionsxiiSMB Setup...

Connecting to the Network4–5The illustrations are logical diagrams are not intended to describe thephysical arrangement (topology) of devices on the n

Connecting to the Network4–6Mac OS Environment with AppleTalkMac OS WorkstationPrinterAppleTalkMac OS Workstation can printdirectly and use Fiery Util

Connecting to the Network4–7Windows Computers in a Novell EnvironmentNetWare ServerAnothersupportedprotocolPrinterTCP/IP (http) forFiery WebToolsWindo

Connecting to the Network4–8Windows NT 4.0 Server EnvironmentWindows NT 4.0 Workstationor Windows NT Serveracting as Print ServerPrinterTCP/IP (lpd) f

Connecting to the Network4–9Windows Computers Using Windows PrintingAnothersupportedprotocolPrinterTCP/IP (SMB) protocolWindowsWorkstationFor Windows

Connecting to the Network4–10Unix and Windows NT 4.0 Workstations on a TCP/IP NetworkUNIX Serveror WorkstationAnothersupportedprotocolPrinterTCP/IP (l

Connecting to the Network4–11Parallel Port ConnectionA supportednetwork protocolPrinterParallel inputPC Workstation,Server or LaptopProtocol notdirect

Connecting to the Network4–12Connecting the DP-C106 to the NetworkComplete the following steps before you configure the DP-C106 andthe workstations th

5–1Preparing for the SetupSuccessful printing requires careful setup. This chapter leads youthrough the pre-setup preparation. It also introduces Fier

Preparing for the Setup5–2Printer ConnectionsThe DP-C106 supports three print connections:• Hold Queue — Jobs that are sent to the Hold queue are spo

Operating Instructions Table of ContentsxiiiCopying Printer Description Files...

Preparing for the Setup5–3PasswordsPasswords provide a means of controlling access to printer functions:• Administrator passwords provide the highest

Preparing for the Setup5–4Control Level ScenariosTypical scenarios of access and control, ranging from least control tostrictest control, are describe

Preparing for the Setup5–5• A designated administrator and a designated operator, no FieryWebTool accessOnly an administrator can perform Setup, and

Preparing for the Setup5–6Fiery WebToolsThe printer can support Internet or intranet access with FieryWebTools from Windows 95/98/Me, Windows 2000, Wi

Preparing for the Setup5–7Network Server Setup RequirementsFor Novell, and Windows NT 4.0 (using TCP/IP) networks, the networkservers must be configur

Preparing for the Setup5–8Ensuring the Printer ConnectionComplete the following steps before you configure the server and theworkstations that will pr

6–1Setting Up the Network ServerThis chapter describes environments that typically include one or moreNovell NetWare and Windows NT 4.0 network server

Setting Up the Network Server6–2Printing on a NetWare 3.x, 4.x or 5.x NetworkThe NetWise™ features built into the DP-C106 supports the followingnetwor

Setting Up the Network Server6–3Overview of IPX Printing to the DP-C106Setting up the DP-C106 is similar to setting up any other PostScriptprinter on

Setting Up the Network Server6–4You do not have to rerun Setup when adding or removing a NetWarequeue, but you should initialize these settings by pow

Table of Contents Operating Instructionsxiv12. Installing the Fiery Software for Windows and Macintosh...12-1Installing the

Setting Up the Network Server6–5Configuring NDS ConnectionsOn the NDS File Server In WebSetup At the Client WorkstationIn NetAdmin:Create NDS print qu

Setting Up the Network Server6–6Setting Up an NDS ConnectionIn NDS, all NetWare entities (objects) are organized in a hierarchicaltree structure. Obje

Setting Up the Network Server6–7Setting Up a NetWare Print Queue for BinderyFor NetWare 3.x and for 4.x or 5.x in emulation mode, the NetWareprint ser

Setting Up the Network Server6–8The DP-C106 on a TCP/IP Network with Windows NT 4.0When a Windows NT 4.0 workstation is configured to connect to theDP

Setting Up the Network Server6–9Configuring a Windows NT 4.0 ServerUse the following procedure to configure a Windows NT 4.0 server tocommunicate with

Operating Instructions Table of ContentsxvSetting Print Options Using Shortcuts... 13-12Se

Table of Contents Operating Instructionsxvi17. Using Fiery WebSpooler...

Operating Instructions Table of ContentsxviiTo Restore Default Calibration Measurements...19-6Expert Mode

Table of Contents Operating Instructionsxviii21. Copy Features ...

Operating Instructions Table of ContentsxixAuto Mode Change ...

TRADEMARKS/COPYRIGHTSThe following trademarks and registered trademarks are used throughout this manual.Microsoft, MS-DOS, Windows, and Windows NT are

Table of Contents Operating Instructionsxx10 Bin Sorter Error Messages ...2

Operating Instructions Table of Contentsxxi25. Technical Data...

1-1Setting Up the DP-C106This chapter contains the hardware installation instructions only. To install the printerdriver software, go to the Installi

Setting Up the DP-C106 Preparing for the Installation1-2Space Requirements for the DP-C106 PrinterCAUTIONThe Panasonic DP-C106 has ventilation opening

Preparing for the Installation Setting Up the DP-C1061-3Space Requirements With the Optional 10 Bin SorterThe following illustration shows the dimensi

Setting Up the DP-C106 Preparing for the Installation1-4Checking the Installation ComponentsEnsure that all of the components you ordered are availabl

Installing the System Console Setting Up the DP-C1061-5Installing the System ConsoleTo install the System Console, perform the following steps.WARNING

Setting Up the DP-C106 Installing the System Console1-66. Remove all the tape from the outside of the System Console.7. Pull the top paper tray open

Installing the System Console Setting Up the DP-C1061-712. Remove the tape from the paper feed area access door, and then openthe door.13. Remove th

Setting Up the DP-C106 Installing the System Console1-8This page is intentionally left blank.

iiiSafety Notes, CompliancesCertifications, and Other NoticesPanasonic reserves the right to change this information without notice, andmakes no warra

Unpacking the Printer Setting Up the DP-C1061-9Unpacking the PrinterRead all the steps before performing this procedure. There are decisions tomake b

Setting Up the DP-C106 Unpacking the Printer1-10WARNINGThe Printer weighs 153 pounds (69.5 kg) without the Toner Cartridges andthe Print/Copy Cartridg

Unpacking the Printer Setting Up the DP-C1061-116. Carefully, lift the Printer from the pallet.CAUTIONEnsure that the Harness Access Cover is open be

Setting Up the DP-C106 Unpacking the Printer1-12b. Remove the Paper Tray 2, and tighten the two Thumb Screwsshown below. Do not over tighten the Thu

Unpacking the Printer Setting Up the DP-C1061-13c. Inside the Front Cover10. Remove all the internal packing from the Printer by performing steps at

Setting Up the DP-C106 Unpacking the Printer1-14c. Pull and remove the narrow strip labeled G from the Toner chamber.d. Press the Anti-rotation butto

Unpacking the Printer Setting Up the DP-C1061-15i. Close the Paper Tray 1.j. Gently pull the Fuser area open and remove the spacer labeled A.k. Lif

Setting Up the DP-C106 Unpacking the Printer1-16o. Gently pull the handle until the Bypass Transport is completelyopened, then remove the two spacers

Unpacking the Printer Setting Up the DP-C1061-17b. Open the Harness Access Cover.c. Connect the two small connectors from the System Console intothe

Setting Up the DP-C106 Unpacking the Printer1-18This page is intentionally left blank.

Safety Notes, Compliances, Certifications, and Other NoticesivNever push objects of any kind into the slots in the covers, as they may touchdangerous

Printer Installation Setting Up the DP-C1061-19Printer InstallationPerform this procedure after the Printer is unpacked, and placed in a suitablelocat

Setting Up the DP-C106 Printer Installation1-20c. Place the left-hand arm of the tray into the corresponding hole asshown.2. Install the Print/Copy

Printer Installation Setting Up the DP-C1061-213. Install the Print/Copy Cartridge:a. Remove the Print/Copy Cartridge from the box.b. Tear open the

Setting Up the DP-C106 Printer Installation1-22d. Holding the cartridge by the strap, align the guide with the Printerrail.e. Push the cartridge all

Printer Installation Setting Up the DP-C1061-23g. Rotate lever A in the direction of the arrow until the dot is alignedwith the Locked symbol.4. Inst

Setting Up the DP-C106 Printer Installation1-24d. Align the arrow visible on the top of the cartridge with the Red Dotsticker on the chamber (located

Printer Installation Setting Up the DP-C1061-25f. Press and release the Anti-rotation button.g. Rotate the Rotary Knob in the direction of the arrow

Setting Up the DP-C106 Printer Installation1-266. Close the Printer Front Cover.The Next StepIf you have ordered the optional Duplex Unit/Kit, go to

Installing the Duplex Unit/Kit Setting Up the DP-C1061-27Installing the Duplex Unit/Kit (option)The Duplex Unit/Kit enables the DP-C106 to print two-s

Setting Up the DP-C106 Installing the Duplex Unit/Kit1-283. Open Paper Tray 1.301128A-WOL04. Using a phillips head screwdriver, remove the screw sho

Safety Notes, Compliances, Certifications, and Other NoticesvUnplug the DP-C106 from the wall outlet and refer servicing to qualifiedservice personnel

Installing the Duplex Unit/Kit Setting Up the DP-C1061-296. Install the Duplex Unit/Kit:a. Align the rails on the tray with the rails in the Printer

Setting Up the DP-C106 Installing the Duplex Unit/Kit1-30b. Using a screwdriver, remove the two screws from lower left-handcover of the Printer as sh

Installing the Duplex Unit/Kit Setting Up the DP-C1061-319. Remove the Left Connector Cover (Plain) located on the lower left-handside of the Printer

Setting Up the DP-C106 Installing the Duplex Unit/Kit1-32b. Connect the small connector from the Lower Inverter to the smalljack located at the rear

Installing the Duplex Unit/Kit Setting Up the DP-C1061-33b. Connect the tiny connector on the rear of the Upper Inverter to thesmall jack in the acce

Setting Up the DP-C106 Installing the Duplex Unit/Kit1-3412. Reinstall the Output Tray if it was removed in step 7.The Next StepGo to the Loading the

Loading Paper in the Paper Tray Setting Up the DP-C1061-35Loading Paper in the Paper TrayWhen loading paper, use paper weight between 14 to 23 lbs. R

Setting Up the DP-C106 Loading Paper in the Paper Tray1-363. Pinch the Horizontal and Vertical Paper Guides and move them awayfrom the center of the

Loading Paper in the Paper Tray Setting Up the DP-C1061-37Moving the guides too tight against the paper stack can cause a jam.7. Ensure that the vert

Setting Up the DP-C106 Loading Paper in the Paper Tray1-38This page is intentionally left blank.

Safety Notes, Compliances, Certifications, and Other NoticesviSafety NotesFCCThis equipment has been tested and found to comply with the limits for aC

Installing the Scanner Rack Setting Up the DP-C1061-39Installing the Scanner RackYou will need a phillips head screwdriver to perform this installatio

Setting Up the DP-C106 Installing the Scanner Rack1-403. Attach the Left Leg and Right Leg to the Rear/Bottom Plate using eightscrews (M4 x 10) as sh

Installing the Scanner Rack Setting Up the DP-C1061-417. Place the table top face-down on the floor.a. Place the Left Support and the Right Support

Setting Up the DP-C106 Installing the Scanner Rack1-428. Turn the Upper Assembly over, and slide it into the legs of the LowerAssembly. Line up the

Installing the Scanner Rack Setting Up the DP-C1061-4310. Install the two Bumpers into the rear slots of the bottom plate.If the optional Duplex Unit

Setting Up the DP-C106 Installing the Scanner Rack1-44The Next StepGo to the Installing the Scanner with ADF procedure.

Installing the Scanner with ADF Setting Up the DP-C1061-45Installing the Scanner with ADF1. Open the Scanner with ADF carton.2. Ensure that the foll

Setting Up the DP-C106 Installing the Scanner with ADF1-466. Ensure that the front Scanner feet are placed into the round recessedareas on the top fr

Installing the Scanner with ADF Setting Up the DP-C1061-479. Connect the Scanner cables by performing the following steps:a. Install one end of the

Setting Up the DP-C106 Installing the Scanner with ADF1-48c. Connect the cable to the back of the Scanner and tighten the twoscrews.10. Connect the

Safety Notes, Compliances, Certifications, and Other NoticesviiWARNINGThis product is certified, manufactured and tested in compliance with strictsafe

Installing the Scanner with ADF Setting Up the DP-C1061-49The Next StepIf you are installing the optional 10 Bin Sorter, go to the Installing the 10 B

Setting Up the DP-C106 Installing the Scanner with ADF1-50This page is intentionally left blank.

Installing the 10 Bin Sorter Setting Up the DP-C1061-51Installing the 10 Bin SorterThe 10 Bin Sorter is an optional accessory for the DP-C106. It atta

Setting Up the DP-C106 Installing the 10 Bin Sorter1-522. Review the 10 Bin Sorter components before installing the unit.1 Sorter Bins 2 High Capacit

Installing the 10 Bin Sorter Setting Up the DP-C1061-53Unpacking the 10 Bin SorterRead all the steps before performing this procedure.1. Open the box

Setting Up the DP-C106 Installing the 10 Bin Sorter1-543. Remove the cardboard inserts that hold the unit in place. Move anyplastic away from the bot

Installing the 10 Bin Sorter Setting Up the DP-C1061-55CAUTIONWhen rolling an unattached 10 Bin Sorter, hold the unit from the inboardside, not the bi

Setting Up the DP-C106 Installing the 10 Bin Sorter1-567. Remove the tape and cardboard from the inboard side of the 10 BinSorter.8. Remove the card

Installing the 10 Bin Sorter Setting Up the DP-C1061-57CAUTIONDo not remove the plastic tie wrap on the metal roller under the jamclearance cover. The

Setting Up the DP-C106 Installing the 10 Bin Sorter1-58Connecting the 10 Bin SorterRead all the steps before performing this procedure.CAUTIONEnsure t

Safety Notes, Compliances, Certifications, and Other NoticesviiiWARNINGThis is a Class A product. In a domestic environment this product maycause rad

Installing the 10 Bin Sorter Setting Up the DP-C1061-594. Perform one of the following:• If the DP-C106 does not have the optional Duplex Unit/Kit,

Setting Up the DP-C106 Installing the 10 Bin Sorter1-605. Align the 10 Bin Sorter with the left side of the DP-C106 so the ThumbScrews on the plate a

Installing the 10 Bin Sorter Setting Up the DP-C1061-617. Remove the Left Connector Cover (Plain) that is below the power plugon the left side (Rear

Setting Up the DP-C106 Installing the 10 Bin Sorter1-62CAUTIONBe careful not to squeeze or disconnect any of the wires or the InterfaceCable with the

Installing the 10 Bin Sorter Setting Up the DP-C1061-6311. Slide the 10 Bin Sorter to the right into position.

Setting Up the DP-C106 Installing the 10 Bin Sorter1-64The Next StepGo to the Printing the Test Page procedure.

Printing the Test Page Setting Up the DP-C1061-65Switching the Power On1. Press the Power Switch to the On (I) position on the Printer.2. Press the

Setting Up the DP-C106 Printing the Test Page1-66Switching the Power Off1. Ensure that the READY message is displayed on the two Control Panels.Do not

Printing the Test Page Setting Up the DP-C1061-67Printing a Test Page from the Printer Control PanelPrint the test page in order to ensure that the Pr

Setting Up the DP-C106 Printing the Test Page1-68Making a Test Copy from the ScannerFor a quick overview of the Scanner Control Panel, refer to Gettin

ixTable of Contents1. Setting Up the DP-C106 ...1-1Preparing for

Adding Memory to the Printer Setting Up the DP-C1061-69Adding Memory to the PrinterYou will need a phillips head screwdriver to perform this procedure

Setting Up the DP-C106 Adding Memory to the Printer1-703. Slide the panel to the rear and lift to remove. The memory card slots arelocated behind th

Adding Memory to the Printer Setting Up the DP-C1061-716. To replace the 64MB memory card perform the following steps:a. In order to remove the 64MB

Setting Up the DP-C106 Adding Memory to the Printer1-727. Insert the left-hand side Printer panel into place as shown below.8. Press the panel close

Adding Memory to the Printer Setting Up the DP-C1061-7310. Switch On the Printer and the Scanner power.0301232A-WOL11. After a few moments, READY is

Setting Up the DP-C106 Adding Memory to the Printer1-74The Next StepPerform one of the following steps:• If you are adding memory to the Scanner, go

Adding Memory to the Scanner Setting Up the DP-C1061-75Adding Memory to the ScannerThe Scanner Memory Card enables 2-Sided copying.You will need a fla

Setting Up the DP-C106 Adding Memory to the Scanner1-763. Press the latch toward the front, and remove the access cover from thePrinter.4. Using a S

Adding Memory to the Scanner Setting Up the DP-C1061-777. Align the screws on the end of the memory card to the holes in the rearPrinter cover.8. Us

Setting Up the DP-C106 Adding Memory to the Scanner1-78The Next StepGo to the Installing the Oversize Paper Tray/Transparency Tray (option)section of