Panasonic PT-DZ6710 User Manual download pdf (Page 11)

Getting Started

Connections

ENGLISH - 11

J Connecting with VIDEO IN/S-VIDEO IN

Connecting example: Computers

NOTE:

• For the specifications of the RGB signals that can be applied from the computer, see the data sheet of the operating

instructions that is provided with the projector.

• If your computer has the resume feature (last memory), the computer may not function properly until the resume capability

is disabled.

• When the SYNC ON GREEN signal is input, do not input sync signals to the SYNC/HD and VD terminals.

• When using DVI-D input, EDID settings may be required for the connected device. See “DVI-D IN” on page 26.

Connecting example: AV equipment

NOTE:

• When connecting with a VCR, be sure to use the one with a built-in time base corrector (TBC) or use a TBC between the

projector and the VCR.

• If non-standard burst signals are connected, the image may be distorted. If this is the case, connect a TBC between the

projector and the VCR.

• The DVI-D signals input terminal supports only a single link.

• The HDMI - DVI-D conversion cable is required to connect an HDMI compliant device.

• It is possible to connect the DVI-D input terminal with an HDMI- or DVI-D compliant device, but with some devices the

images may not appear or other problems may be encountered in operation.

Control Computers

Control

Projector 1 Projector 2

Control

VCR

HDMI equipped

DVD player (HDCP)

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 51 52

No comments

Panasonic PT-DZ6710 User Manual Page 11