Panasonic PT-DZ6710 User Manual download pdf (Page 16)

ENGLISH - 16

Settings

PICTURE menu

Depending on the projection environment, you can use these

preset parameter settings to optimise image projection. Press

I H to cycle through the options.

You can adjust the contrast of the projected image. Adjust the

BRIGHTNESS in advance if necessary.

Call up the bar scale by pressing I, H or the ENTER button,

and press I H to adjust the value.

You can adjust the brightness of the projected image. Call up

the bar scale by pressing I, H or the ENTER button, and

press I H to adjust the value.

You can adjust the colour saturation of the projected image.

Call up the bar scale by pressing I, H or the ENTER button,

and press I H to adjust the value.

You can adjust the skin tone in the projected image. Call up the

bar scale by pressing I, H or the ENTER button, and press

I H to adjust the value.

You can adjust the white balance of the projected image.

Select the required option and press I, H or the ENTER

button to call up the bar scale.

Q Adjusting more detailed white balance

You can adjust white balance of RGB individually in high

and low level.

1. Select USER and press the ENTER button.

2. Select WHITE BALANCE HIGH or WHITE BALANCE

LOW, and call up the scale bars by pressing I, H or

the ENTER button.

3. Press I H to adjust the value of each colour.

Setting range

WHITE BALANCE HIGH: 0 to 255 (Default: 255)

WHITE BALANCE LOW: 0 to 63 (Default: 32)

PICTURE MODE

STANDARD Setting for a general image

CINEMA Setting for a cinema type movie

NATURAL

Reproduces the original colour of the

image

DYNAMIC Bright and sharp setting

GRAPHIC Setting for image from computers

NOTE:

• Factory default is STANDARD for moving images and

GRAPHIC for RGB system.

CONTRAST

I Lower

H Higher

Setting range: -31 to +31

BRIGHTNESS

I Darker

H Brighter

Setting range: -31 to +31

Remote control

See “Navigating through the menu” on page 15.

See “Main menu and Sub-menu” on page 12.

COLOR

I Lighter

H Darker

Setting range: -31 to +31

TINT

I More reddish

H More greenish

Setting range: -31 to +31

COLOR TEMPERATURE

DEFAULT Balanced white

USER More detailed adjustment

MIDDLE More reddish

HIGH More bluish

NOTE:

• With excessive unbalanced adjustment, such as extremely

high with extremely low setting, all the colours may be

displayed abnormally. Press the DEFAULT button to reset the

selected item to the default setting.

•Adjust COLOR TEMPERATURE with signal image. Internal

test pattern is not for COLOR TEMPERATURE adjustment.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 51 52

Comments to this Manuals

No comments

Panasonic PT-DZ6710 User Manual Page 16

Comments to this Manuals

Related products and manuals for Projectors Panasonic PT-DZ6710