Panasonic WV-CP300 Installation Guide download pdf (Page 15)

Camera mount

bracket

(locally procured)

Screws

(locally procured)

Screws

(locally procured)

4 Installation of camera mount bracket (locally procured)

Secure the camera mount bracket (locally procured) to the installation position, and mount the

camera on the camera mount bracket.

Prepare mounting screws according to the material of the area where the camera mount

bracket (locally procured) is to be installed. The installation method may be different depending

on the material of the area where the bracket is to be installed.

• When installing on steel: Fix with bolts and nuts (M6 or M8).

• When installing on concrete: Fix with expansion anchor bolts (M6 or M8).

• Use mount bracket with strength 5 times of the total weight of the camera body and lens.

• The height and length of the camera mount bracket must be appropriate to ensure the use

of the safety wire in the accessories.

The mounting conditions of the camera mount bracket (locally procured) are described as

follows:

Installation

position

Recommended

screw

Screw quantity Minimum pull-out

strength (per 1 pc.)

On ceiling M6 or M8 3 pcs. 196 N {44.06 lbf}

On wall M8 4 pcs. 921 N {207.05 lbf}

Important:

• Refer to the operating instructions of the camera mount bracket (locally procured) for the

mounting angle of the camera mount bracket for a ceiling or wall.

• When the camera mount bracket is mounted on a wall, be sure to observe the mounting height

described on the illustration.

Floor

More than

270 cm

{8.9 feet}

PGQX1142YA_WV-CP300_G.indd 15 2012/3/30 16:53:37

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 31 32

No comments

Panasonic WV-CP300 Installation Guide Page 15