Useful Information
36
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
*1 KX-TG2511/KX-TG2521
*2 KX-TG2521
Programmable settings
The unit does not work. L Make sure the batteries are installed correctly
(page 11).
L Fully charge the batteries (page 11).
L Check the connections (page 11).
L Unplug the base unit’s AC adaptor to reset the
unit and turn off the handset. Reconnect the
adaptor, turn on the handset and try again.
L The handset has not been registered to the
base unit. Register the handset (page 40).
I cannot hear a dial tone. L Make sure that you are using the supplied
telephone line cord. Your old telephone line
cord may have a different wiring configuration.
L The base unit’s AC adaptor or telephone line
cord is not connected. Check the connections.
L Disconnect the base unit from the telephone
line and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your service provider/telephone company.
I cannot use the intercom
*1
or
phonebook copy
*2
feature.
L These features are shared between the
handsets. Although the handset displays
“Intercom”, “Copy All”, or “Copy”, these
features are not available for this model.
Problem Cause/solution
The display is in a language I
cannot read.
L Change the display language (page 14).
I cannot activate the eco mode. L You cannot set eco mode when you set the
repeater mode “On”. If required, set the
repeater mode to “Off” (page 22).
Problem Cause/solution
TG251x_2xE(e).book Page 36 Monday, January 25, 2010 3:09 PM
Comments to this Manuals