Panasonic KXTG2511E User Manual download pdf (Page 40)

Useful Information

Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Liquid damage

Caution:

L To avoid permanent damage, do not use a microwave oven to speed up the drying

process.

Registering a handset to the base unit

1 Handset:

{j/OK}

2 {V}/{^}: “Handset Setup” i {j/OK}

3 {V}/{^}: “Register H.set” i {j/OK}

4 Base unit:

Press and hold {x} for about 5 seconds. (No registration tone)

L If all registered handsets start ringing, press the same button to stop. Then

repeat this step. (KX-TG2512/KX-TG2513/KX-TG2522/KX-TG2523/

KX-TG2524)

L The next step must be completed within 90 seconds.

5 Handset:

Wait until “Enter Base PIN” is displayed. i Enter the base unit PIN (default:

“0000”). i {j/OK}

L If you forget your PIN, see page 37.

L When the handset has been registered successfully, w stops flashing.

Note:

L If the registration fails, try to deregister the handset and then re-register it again.

Press {j/OK} i {V}/{^}: “Base Unit Setup” i {j/OK} i {3}{3}{5}

i {j/OK} i Select the handset(s) you want to cancel, by pressing the

desired handset number. i {j/OK} i {V}/{^}: “Yes” i {j/OK} i

Repeat from step 1.

Problem Cause/solution

Liquid or other form of moisture

has entered the handset/base

unit.

L Disconnect the AC adaptor and telephone line

cord from the base unit. Remove the batteries

from the handset and leave to dry for at least

3 days. After the handset/base unit are

completely dry, reconnect the AC adaptor and

telephone line cord. Insert the batteries and

charge fully before use. If the unit does not

work properly, contact an authorised service

centre.

TG251x_2xE(e).book Page 40 Monday, January 25, 2010 3:09 PM

1 2 ... 35 36 37 38 39 40 41 42 43 44

No comments

Panasonic KXTG2511E User Manual Page 40