Panasonic EY7440-U1 User Manual download pdf (Page 8)

Ref. No. 2G Procedure 2A →

→→

→ 2B →

→→

→ 2C→

→→

→ 2D→

→→

→ 2E→

→→

→ 2F→

→→

→

Attachment of the Housing.

1. Place the driving block onto the housing A and place the spring

for release lever and the hook release lever.

2. Place the switch assembly, operation panel, click spring and F/R

selector handle onto the housing A.

NOTE :

Make sure that the lead wires are pressed fit firmly.

3. Close the housing A and B with pushing the radiating plate on the

direction of the arrow and tighten 8 housing screws.

NOTE :

Confirm to set the radiating plate properly. If the radiating plate

lean toward the motor brush side, the housing B can not be

closed.

4. Place the H/L change handle into the rail properly.

5. Insert the belt hook into the housing and tighten with hook bolt.

EY7440-U1 /

1 2 3 4 5 6 7 8 9 10 11 12

No comments

Panasonic EY7440-U1 User Manual Page 8