Panasonic WJHD316 User Manual Page 35

  • Download
  • Add to my manuals
  • Print
  • Page
    / 98
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 34
35
Screenshot 3
The window for the settings of the event action for each
event type will be displayed.
Step 3
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 4
Click the [SET] button after completing the settings.
Setup Item
Priority
Assigns priorities to the selected event.
The camera will move to a preset position at an event
occurrence if "Follow the priority" is selected for
"Priority" of "System" menu or if the priority of the event
is set to the same priority level or higher than the priority
level of the user who is controlling the camera.
Alarm Output
Perform the settings for alarm output such as on/off to
supply the alarm signal from a selected camera chan-
nel, selection of connectors (TRM 1 – TRM 16) from
which the alarm signals are supplied, and the alarm out-
put duration.
The following are available for alarm output duration.
OFF: No alarm output is supplied.
1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m
EXT: Alarm output will continue until the [ALARM
RESET] button is pressed.
Buzzer
Select ON or OFF to set whether or not to sound the
buzzer at an event occurrence. The following are avail-
able for buzzer sound duration.
OFF: The buzzer will not sound.
1 s - 30 s (in 1 second intervals)
/40 s/50 s/1 m/2 m/3 m/4 m/5 m
EXT: Alarm output will continue until the [ALARM
RESET] button in the status display area or on the
front panel of the unit is pressed.
Actions work with an event occurrence on the
monitor 1
Select a camera channel whose image is to be dis-
played on a single screen display channel whose 1 at
an event occurrence. When OFF is selected, images
displayed on monitor 1 will not be switched at an event
occurrence.
Actions work with an event occurrence on the
monitor 2
Select a camera channel whose image is to be dis-
played on a single screen display on monitor 2 at an
event occurrence. When OFF is selected, images dis-
played on monitor 2 will not be switched at an event
occurrence.
Page view 34
1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 97 98

Comments to this Manuals

No comments