Panasonic NV-L25 User Manual download pdf (Page 27)

Transmltttm Pm^^urtming Efatat

Timer On/Off

Keep pressing the Transmit Button and confirm that the

programmed data on the Multi-Function Display of the VTR

are as desired.

After releasing the button, the data will continue to be dis

played for about 12 seconds.

• If the transmission was not received correctly, the

“Beep-Beep, Beep-Beep" sound from the VTR wilt warn

you. In this case, perform transmission again.

• The transmission is possible when the VTR is turned on

but is not in any of the recording or playback operation

modes. It is also possible when the VTR is in the timer

recording standby mode (g indication is lit).

•The programming will be done on the next lower unoccu

pied timer programme number (8~ 1).

• If all programme numbers are occupied, the “Beep-Beep,

Beep-Beep’’ sound from the VTR will warn you that the

programming cannot be made.

• When the Transmit Button is pressed, the VTR will auto

matically be put into the timer recording standby condition

and the VTR will be turned off.

• To operate the VTR before the timer recording will be

performed, press the Timer Record Button to suspend the

timer recording standby condition. After using the VTR, be

sure to press the Timer Record Button again, otherwise

the timer recording will not be made.

After programming a timer recording, the VTR is in the timer

recording standby mode and cannot be used for any other

operation, such as playback. If some other operation is

desired, first trace the “TIMER ON/OFF" bar code and

transmit it to the VTR with the Transmit Button.

To later reset the VTR to the timer recording standby mode,

trace the “TIMER ON/OFF" bar code again and transmit it

with the Transmit Button,

TIMER ON/OFF

For P^f^raffimtng More ITtmOneTIni^RecxiixIhig tit

Soccessior»

Repeat the following operation steps 0~©'

Q Trace the “CANCEL” bar code on the Programming

Sheet.

CANCEL

B-

* •

@ Trace the bar codes for “CHANNEL”, “DATE”,

“STARTTIME" and “END TIME”.

Confirm that the present time is displayed on the

Multi-Function Display of the VTR, and transmit the

data.

• If the next timer programming data are transmitted

while the previous timer programming data are still

being displayed, the displayed timer recording data

will be cancelled.

27:

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 38 39

Comments to this Manuals

No comments

Panasonic NV-L25 User Manual Page 27

Comments to this Manuals

Related products and manuals for Video recorders Panasonic NV-L25