Panasonic NV-L25 User Manual download pdf (Page 33)

DUBB

Dubbing (copying) from one video cassette to another.

AUDIO IN VIDEO IN

• To assure smooth, noiseless cuts when interrupting

the recording, always use the Pause/Still Button

(II).

• To obtain smooth cuts when starting the recording

from the stop mode:

1. Play back the last part of the previously recorded

material to confirm its ending point, and then

press the Pause/Still Button (II).

2. Press the Record Button (♦).

(The VTR is still in the pause mode.)

3. To start recording, press the Pause/Still Button

(II) again.

•The picture quality of a re-recorded tape is not as

good as that of the original.

• Disconnect all cables from the Video Input and Au

dio Input sockets after finishing the recording. If

they remain connected, it is impossible to record TV

programmes.

Preparation

• Make the necessary connections as shown in the connec

tion diagram.

• Press the VTR On/Off Switches to turn both VTRs on,

• Make sure that the Noise Filter/Edit Selector of both the

recording and playback VTRs (if equipped) are in the

“EDIT ON” position. Set these switches to “OFF” for or

dinary use of the VTRs.

(The Noise Filter/Edit Selector is on the front panel.)

^ Place the recorded cassette in the playback VTR and a

blank video cassette with the erasure prevention tab

intact in the recording VTR.

^ Press the Record Button (•) on the recording VTR,

0 Press the Play/x2 Button (►) on the playback VTR.

0 Press the Stop Button (■) on both VTRs to stop the

dubbing.

(33;

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 39

No comments

Panasonic NV-L25 User Manual Page 33