Panasonic KX-TS620 User Manual download pdf (Page 14)

14

Settings

For assistance, please visit http://www.panasonic.com/phonehelp

LCD Contrast

You can select the LCD contrast level

from 1 to 4 by programming. To make

the display clearer, set to high level.

Your phone default setting is 2.

Make sure that the handset is on the

cradle, the AC adaptor is connected

and the SP-PHONE/HEADSET

indicator light is off.

1

Press {FUNCTION/EDIT}.

2

Scroll to “Program ?” by

pressing {

4} or {3} and press

{OK} (Yes key).

3

Scroll to “LCD contrast ?” by

pressing {

4} or {3} and press

{OK} (Yes key).

• The current setting is displayed.

4

Select the desired contrast by

pressing {

4} or {3}, then press

{OK} (Save key).

• A long beep sounds.

• The display will return to step 3. To

exit the programming mode, press

{EXIT} or wait for 60 seconds.

• You can exit the programming mode any

time by pressing {EXIT}.

Ringer Volume

Make sure that the AC adaptor is

connected and the unit is not being

used.

To select HIGH (default), MID or

LOW, press {HOLD/RINGER}.

• Each time you press the button, the ringer

volume will change and the selected

volume will ring.

To turn the ringer OFF, press and hold

{HOLD/RINGER} until 2 beeps sound.

•“ ” is displayed.

To turn the ringer ON, press {HOLD/

RINGER}.

• The ringer will sound at the HIGH level.

Caller ID Number Auto Edit

Once you call back an edited number,

this unit will remember Area Code and

Format of the Edited Number. Next time

when someone calls from the same

Area Code, caller information will be

customized by the unit as follows:

s When the call is being received, the

Caller ID number will be displayed in the

same Format as the Edited Number.

s After the call is ended, the telephone

number of the caller, when reviewed from

the Caller list, will be displayed in the

same Format as the Edited Number.

For example, you can use this feature to

set the unit to ignore the area code of

callers in your area code, so that you

can call these local numbers using

caller information without dialing the

area code. To activate this feature, you

must edit an item in the caller list, then

call this number. After that, phone

numbers from that caller’s area code

are edited automatically. This feature

can be turned on or off (

p. 15).

Your phone default setting is ON.

Low

!!!!

High

 [OK]=Save

LCD contrast

TS620bk01.book Page 14 Thursday, June 1, 2006 2:15 PM

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 63 64

Comments to this Manuals

No comments