Panasonic DMC-FS5 User Manual download pdf (Page 85)

Ш Connection in the PTP mode (Windows® XP, Windows Vista® and Mac OS X only)

Set [USB MODE] to [PictBridgG(PTP)].

Data can now ba read only from the card into the PC.

•When there are 1000 or more pictures on a card, the pictures may not be imported in the PTP mode.

Connecting to other equipment

Printing tiK,

If you connect the camera to a printer supporting PictBridge, you can select the pictures to

be printed out and instruct that printing be started on the camera’s LCD monitor.

Preparations:

Turn on the camera and the printer.

Remove the card before printing the pictures in the built-in memory.

Perform the print quality and other settings at the printer before printing the pictures.

Connect the camera to a printer via the USB connection cabie ®

(supplied).

(A) USB connection cable (supplied)

• Check the directions ot the connectors, and plug them straight in or unplug them straight out.

(Otherwise the connectors may be bent out of shape which will cause trouble.)

@ Align the marks, and insert.

• Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5PP; optional), if the

remaining battery power becomes low while the camera and the printer are connected, the

status indicator blinks and the alarm beeps. If this happens during printing, stop printing at

once. If not printing, disconnect the USB connection cable.

•When the camera is connected to the printer, the cable disconnect prohibit icon [g] appears.

Do not disconnect the USB cable while [g] is displayed.

Press A/T to select [PictBridge(PTP)], and then

press [MENU/SET],

[jsbI USB MODE

VQT1M97 85

1 2 ... 80 81 82 83 84 85 86 87 88 89 90 ... 119 120

No comments

Panasonic DMC-FS5 User Manual Page 85