Panasonic DMC-FS5 User Manual download pdf (Page 83)

Connecting to other equipment

Connectih^f f > , i

You can acquire recorded pictures to a PC by connecting the camera and the PC.

•You can easily print out or mail the pictures you have imported. Use of the

“PHOTOfunSTUDIO-viewer-” bundled software on the CD-ROM (supplied) is a convenient

way of doing this.

Preparations:

Turn on the camera and the PC.

Remove the card before using the pictures in the built-in memory.

Connect the camera to a PC via the USB connection cable ® (supplied).

® USB connection cable (supplied)

• Check the directions of the connectors, and plug them straight in or unplug them straight out.

(Otherwise the connectors may be bent out of shape which will cause trouble.)

@ Align the marks, and insert.

• Use a battery with sufficient battery power or the AC adaptor (DMW-AC5PP; optional). If the

remaining battery power becomes low while the camera and the PC are communicating, the

status indicator blinks and the alarm beeps.

Refer to “Disconnecting the USB connection cable safely” (P84) before disconnecting the USB

connection cable. Otherwise, data may be destroyed.

Press A/T to select [PC], and then press [MENU/

SET],

• If [USB MODE] (P24) is set to [PC] in the [SETUP] menu in

advance, the camera will be automatically connected to the PC

without displaying the [USB MODE] selection screen. Since there

is no need to set this each time you connect to the PC, it is

convenient.

• When the camera has been connected to the PC with

[USB MODE] set to [PictBridge(PTP)], a message may appear

on the PC's screen. Select [Cancel] to close the screen, and

disconnect the camera from the PC. Then set [USB MODE] to

[PC] again.

OH USB MODE

fm'pc

SELECTO , , ,

SET^

VQT1M97 83

1 2 ... 78 79 80 81 82 83 84 85 86 87 88 ... 119 120

No comments

Panasonic DMC-FS5 User Manual Page 83