Panasonic CQ VAD9300U User Manual download pdf (Page 21)

Cautions:

• For smooth adjustment, make sure to first return the lateral angle to the neutral position and then adjust the tilt angle.

• Avoid physical shock on the monitor.

[TILT]

(Adjust)

[A] [VI

[<][>]

(Adjust)

Tilt Angle/Front-Rear Position

Press and hold [TILT] on the display unit for more than 1 second.

Press [Al. [V]. [<] or [>] to adjust.

The setup is the same way as the one from MENU. Refer to

“SET-UP: User Settings” for details. page 40)

Notes:

• Vertical angle (TILT) and front-rear position data are saved in the memory, so

when the display unit is drawn out next, it is automaticaily set at the angle and

in the position adjusted before.

• After adjusting its angle, also adjust the brightness to make it easy for you to

watch. (=^ page 46)

• The car model and installation condition may impose some restrictions on the

adjustment of the monitor's angle and position.

Caution: Do not interfere with the movement of the monitor. Do not change

the position of the unit forcibly.

Display Unit Lateral Angle Adjustment

Hold the display unit by the non-slip part in the upper half of it, and adjust its

lateral angle.

View from above

Caution: There is the danger of your fingers being pinched if you hold the

unit by the lower part. Hold the unit by the upper half, and move it carefully

without applying undue force.

Folding Down the Display Temporarily

Fold Down; press [TILT] on the display unit.

Raise; press [TILT] again on the display unit.

Note: Even when the unit is power off, you can fold down the display temporarily.

Caution: Do not place any object on the display unit, or subject it to undue

force.

CQ-VAD9300U

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 303 304

No comments

Panasonic CQ VAD9300U User Manual Page 21